#!/bin/sh
#
#___INFO__MARK_BEGIN__
##########################################################################
#
#  The Contents of this file are made available subject to the terms of
#  the Sun Industry Standards Source License Version 1.2
#
#  Sun Microsystems Inc., March, 2001
#
#
#  Sun Industry Standards Source License Version 1.2
#  =================================================
#  The contents of this file are subject to the Sun Industry Standards
#  Source License Version 1.2 (the "License"); You may not use this file
#  except in compliance with the License. You may obtain a copy of the
#  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
#
#  Software provided under this License is provided on an "AS IS" basis,
#  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
#  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
#  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
#  See the License for the specific provisions governing your rights and
#  obligations concerning the Software.
#
#  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
#
#  Copyright: 2001 by Sun Microsystems, Inc.
#
#  All Rights Reserved.
#
##########################################################################
#___INFO__MARK_END__
#
# Get Grid Engine architecture and set architecture dependent variables.
# This script is *sourced* by the installation procedure
#
# There are also a couple of shell functions defined which are used by other
# Grid Engine utility script.
#


QLOGIN_DAEMON="undef"
QLOGIN_COMMAND="undef"
RLOGIN_DAEMON="undef"
RLOGIN_COMMAND="undef"
RSH_DAEMON="undef"
RSH_COMMAND="undef"

ARCH=UNKNOWN

if [ -f util/arch ]; then
   ARCH=`util/arch`
elif [ "$SGE_ROOT" != "" -a -x $SGE_ROOT/util/arch ]; then
   ARCH=`$SGE_ROOT/util/arch`
else
   echo "can't find script \$SGE_ROOT/util/arch"
   exit 1
fi

ROOTGROUP=root

case $ARCH in
 sol-*|usol-*)
   AWK=/usr/bin/nawk
   ECHO=/usr/bin/echo
   RC_FILE=sysv_rc
   RC_PREFIX=/etc
   RC_DIR=rc2.d
   XTERM=/usr/openwin/bin/xterm
   MAILER=/bin/mailx
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/sbin/in.telnetd
   RLOGIN_DAEMON=/usr/sbin/in.rlogind
   GETTEXT=/usr/bin/gettext
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 linux*|ulx*)
   AWK=/usr/bin/gawk
   ECHO="/bin/echo -e"
   if [ -x /usr/lib/lsb/install_initd ]; then
      RC_FILE=lsb
      RC_PREFIX=/etc/init.d
      RC_DIR=unused
   elif [ -x /sbin/insserv ]; then
      # SuSe 7.1 and higher uses insserv to add the startup script
      RC_FILE=insserv-linux
      RC_PREFIX=/etc/init.d
      RC_DIR=unused
   elif [ -x /usr/sbin/update-rc.d ]; then
      # Debian uses update-rc.d to add startup scripts
      RC_FILE=update-rc.d
      RC_PREFIX=/etc/init.d
      RC_DIR=unused
   elif [ -x /sbin/rc-update ]; then
      # Gentoo uses rc-update to add startup scripts
      RC_FILE=rc-update
      RC_PREFIX=/etc/init.d
      RC_DIR=unused
   else
      RC_FILE=sysv_rc
      RC_PREFIX=/etc/rc.d
      RC_DIR=rc3.d
   fi
   XTERM=/usr/bin/X11/xterm
   MAILER=/bin/mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/sbin/in.telnetd
   RLOGIN_DAEMON=/usr/sbin/in.rlogind
   GETTEXT=/usr/bin/gettext
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 cygwin-x86)
   AWK=/usr/bin/gawk
   ECHO="/bin/echo -e"
   RC_FILE=undef
   RC_PREFIX=undef
   RC_DIR=undef
   XTERM=/usr/bin/X11/xterm
   MAILER=/bin/mail
   QLOGIN_COMMAND=undef
   QLOGIN_DAEMON=undef
   RLOGIN_DAEMON=undef
   GETTEXT=/usr/bin/gettext
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 tru64)
   AWK=/usr/bin/nawk
   ECHO=/usr/bin/echo
   RC_FILE=sysv_rc
   RC_PREFIX=/sbin
   RC_DIR=rc3.d
   XTERM=/usr/bin/X11/xterm
   MAILER=/usr/bin/Mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/sbin/telnetd
   RLOGIN_DAEMON=/usr/sbin/rlogind
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 irix*)
   AWK=/usr/bin/nawk
   ECHO=/sbin/echo
   RC_FILE=sysv_rc
   RC_PREFIX=/etc
   RC_DIR=rc2.d
   XTERM=/usr/bin/X11/xterm
   MAILER=/usr/sbin/Mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/etc/telnetd
   RLOGIN_DAEMON=/usr/etc/rlogind
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 hp*)
   AWK=/usr/bin/awk
   ECHO=/bin/echo
   RC_FILE=sysv_rc
   RC_DIR=rc2.d
   RC_PREFIX=/sbin
   XTERM=/usr/bin/X11/xterm
   MAILER=/usr/bin/mailx
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/lbin/telnetd
   RLOGIN_DAEMON=/usr/lbin/rlogind
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 aix*)
   AWK=/usr/bin/nawk
   ECHO=/usr/bin/echo
   RC_FILE=/etc/rc
   XTERM=/usr/bin/X11/aixterm
   MAILER=/usr/bin/Mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/sbin/telnetd
   RLOGIN_DAEMON=/usr/sbin/rlogind
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 cray*)
   AWK=/usr/bin/nawk
   ECHO=/bin/echo
   RC_FILE=/etc/rc
   XTERM=/usr/bin/X11/xterm
   MAILER=/usr/bin/mailx
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/etc/telnetd
   RLOGIN_DAEMON=/etc/rlogind
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 nec*|sx*)
   AWK=/usr/bin/nawk
   ECHO=/usr/bin/echo
   RC_FILE=
   XTERM=/usr/bin/X11/xterm
   MAILER=/usr/bin/mailx
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/sbin/in.telnetd
   RLOGIN_DAEMON=/usr/sbin/in.rlogind
   RSH_DAEMON=undef
   LOADSENSOR_COMMAND=undef
   ;;
 fbsd-*)
   AWK=/usr/bin/awk
   ECHO="/bin/echo"
   RC_FILE=freebsd
   RC_PREFIX=/usr/local/etc/rc.d
   RC_SUFFIX=.sh
   XTERM=/usr/X11R6/bin/xterm
   MAILER=/usr/bin/mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/libexec/telnetd
   RLOGIN_DAEMON=/usr/libexec/rlogind
   GETTEXT=/usr/local/bin/gettext
   RSH_DAEMON=undef
   ROOTGROUP=wheel
   LOADSENSOR_COMMAND=undef
   ;;
 nbsd-*)
   AWK=/usr/bin/awk
   ECHO="/bin/echo"
   RC_FILE=netbsd
   RC_PREFIX=/etc/rc.d
   RC_SUFFIX=.sh
   XTERM=/usr/X11R6/bin/xterm
   MAILER=/usr/bin/mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/libexec/telnetd
   RLOGIN_DAEMON=/usr/libexec/rlogind
   GETTEXT=/usr/bin/gettext
   RSH_DAEMON=undef
   ROOTGROUP=wheel
   LOADSENSOR_COMMAND=undef
   ;;
 darwin-*)
   AWK=/usr/bin/awk
   ECHO=/bin/echo
   RC_FILE=SGE
   RC_DIR=SGE
   RC_PREFIX=/Library/StartupItems
   if [ -x /sw/bin/Eterm ]; then
      XTERM=/sw/bin/Eterm
   else
      XTERM=/usr/X11R6/bin/xterm
   fi
   MAILER=/usr/bin/mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON=/usr/libexec/telnetd
   RLOGIN_DAEMON=/usr/libexec/rlogind
   RSH_DAEMON=undef
   ROOTGROUP=wheel
   LOADSENSOR_COMMAND=undef
   ;;
 win32-x86)
   AWK=/bin/awk
   ECHO="/bin/echo"
   RC_FILE=sysv_rc
   RC_DIR=rc2.d
   RC_PREFIX=/etc
   XTERM=/usr/X11/bin/xterm
   MAILER=/bin/mail
   QLOGIN_COMMAND=telnet
   QLOGIN_DAEMON="/usr/sbin/in.telnetd -i"
   RLOGIN_DAEMON=/usr/sbin/in.rlogind
   RSH_DAEMON=undef
   GETTEXT=
   ROOTGROUP=wheel
   LOADSENSOR_COMMAND="/util/resources/loadsensors/interix-loadsensor.sh"
   ;;
 *)
   echo "Architecture $ARCH not supported by this procedure!"
   exit 1
   ;;
esac

TOUCH=touch
RM=rm
MKDIR=mkdir
CHMOD=chmod
CHOWN=chown
CP=cp
MV=mv

# Some of the following shell function require this variable set to false or
# true
#
autoinst=false

#--------------------------------------------------------------------------
# Translate
# create localized version of arguments using "gettext" and "printf"
#
# USES: variable "$translation" to either translate or not
# 
# $1 = 0  stdout, newline
# $1 = 1  stderr, newline
# $1 = 2  stdout, no newline
# $1 = 3  stderr, no newline
# $1 = 4  just store string in variable $transout
# $2 = string to localize
# $2- args not to localize
#
Translate()
{
   newline=""
   stderr=0

   if [ "$1" = 0 -o "$1" = 1 ]; then
      newline="\n"
   fi

   if [ "$1" = 1 -o "$1" = 3 ]; then
      stderr=1
   fi
   if [ "$1" = 4 ]; then
      stderr=4
   fi
   shift

   if [ "$translation" = 1 ]; then
      transout=`env TEXTDOMAIN=$TEXTDOMAIN TEXTDOMAINDIR=$TEXTDOMAINDIR $GETTEXT "$1"`
      shift
      if [ $stderr = 4 ]; then
         transout=`printf "$transout"$newline "$@"`
      elif [ $stderr = 0 ]; then
         printf "$transout"$newline "$@"
      else
         printf "$transout"$newline "$@" >&2
      fi
   else
      transout="$1"
      shift
      if [ $stderr = 4 ]; then
         transout=`printf "$transout" "$@"`
      elif [ $stderr = 0 ]; then
         printf "$transout"$newline "$@"    
      else
        printf "$transout"$newline "$@" >&2    
      fi
   fi
}

#-------------------------------------------------------------------------
# WaitClear
# Let user press the return key and print message
#
# USES: variables "$autoinst"
#                 "$CLEAR"
# $1 = clear  clear screen 
# $1 =
# $2 = no string - print default messages
# $4 = arg       - print argument
#
WaitClear()
{
   do_clear=$1
   text="$2"

   if [ "$text" != "" ]; then
      $ECHO "$text"
   else
      Translate 2 "Hit <RETURN> to continue >> "
   fi

   if [ "$autoinst" = true ]; then
      echo
   else
      read INP_WaitClear

      if [ $do_clear = clear ]; then
         $CLEAR
      fi
   fi
}

#-------------------------------------------------------------------------
# Enter: input is read and returned to stdout. If input is empty echo $1
#
# USES: variable "$autoinst" 
#
Enter()
{
   if [ "$autoinst" = true ]; then
      $ECHO $1
   else
      read INP
      if [ "$INP" = "" ]; then
         $ECHO $1
      else
         $ECHO $INP
      fi
   fi
}

#-------------------------------------------------------------------------
# YesNo: print argument and get YES/NO answer
# $1 = string to print
# $2 = default value if user enters return. Values are y,n,x (for no default)
#
YesNo()
{
   text=$1
   default=$2
   if [ "$default" = "" ]; then
      default=x
      text="$text >> \c"
   else
      Translate 4 "(y/n)"
      text="$text $transout [$default] >> \c"
   fi

   if [ "$autoinst" = true -a $default != x -a $default != X ]; then
      $ECHO "$text"
      $ECHO $default
      if [ $default = y -o $default = Y ]; then
         return 0
      else
         return 1
      fi
   fi

   YesNo_done=false
   while [ $YesNo_done = false ]; do
      $ECHO "$text"
      read YesNo_INP

      if [ "$YesNo_INP" = "" ]; then
         if [ "$default" = y -o "$default" = Y ]; then
            YesNo_INP=y
         elif [ "$default" = n -o "$default" = N ]; then
            YesNo_INP=n
         fi
      fi

      case "$YesNo_INP" in
         y|y|j|J)
            YesNo_done=true
            ret=0
            ;;
         n|N)
            YesNo_done=true
            ret=1
            ;;
      esac
   done
   return $ret
}

#-------------------------------------------------------------------------
# Fatal Error: print message and exit
#
FatalError()
{
   $ECHO $*                           >&2
   $ECHO ""                           >&2
   Translate 1 "Installation failed. Exit."
   $ECHO ""                           >&2
   exit 1
}

#-------------------------------------------------------------------------
# Execute command and exit if exit status != 0
#
Execute()
{
   if [ "$verbose" = true ]; then
      $ECHO $*
   fi
   $*
   if [ $? != 0 ]; then
      $ECHO >&2
      Translate 1 "Command failed: %s" "$*"
      $ECHO "" >&2
      Translate 1 "Probably a permission problem. Please check file access permissions."
      Translate 1 "Check root read/write permission. Check if SGE daemons are running."
      $ECHO "" >&2
      exit 1
   fi
}

#-------------------------------------------------------------------------
# Execute eval command and exit if exit status != 0
#
ExecuteEval()
{
   if [ "$verbose" = true ]; then
      $ECHO $*
   fi
   eval $*
   if [ $? != 0 ]; then
      $ECHO >&2
      Translate 1 "Command failed: %s" "$*"
      $ECHO "" >&2
      Translate 1 "Probably a permission problem. Please check file access permissions."
      Translate 1 "Check root read/write permission. Check if SGE daemons are running."
      $ECHO "" >&2
      exit 1
   fi
}

#-------------------------------------------------------------------------
# Execute command as user $ADMINUSER and exit if exit status != 0
# if ADMINUSER = default then execute command unchanged
#
# uses binary "adminrun" form SGE distribution
#
# USES: variables "$verbose"    (if set to "true" print arguments)
#                 "$ADMINUSER"   (if set to "default" do not use "adminrun")
#                 "$V5UTILBIN"  (path to the binary in utilbin)
#
ExecuteAsAdmin()
{
   if [ "$verbose" = true ]; then
      $ECHO $*
   fi

   if [ $ADMINUSER = default ]; then
      $*
   else
      if [ -z "$V5UTILBIN" ]; then
         V5UTILBIN=$SGE_ROOT/utilbin/$SGE_ARCH
      fi
      $V5UTILBIN/adminrun $ADMINUSER "$@"
   fi

   if [ $? != 0 ]; then
      $ECHO >&2
      Translate 1 "Command failed: %s" "$*"
      $ECHO >&2
      Translate 1 "Probably a permission problem. Please check file access permissions."
      Translate 1 "Check read/write permission. Check if SGE daemons are running."
      $ECHO >&2
      if [ "$ADMINRUN_NO_EXIT" != "true" ]; then 
         exit 1
      fi
   fi
   return 0
}

#-------------------------------------------------------------------------
# CreateAndMakeWriteable
# create $1 as file and make it writable for everybody
# uses variable $ADMINUSER
#
CreateAndMakeWriteable()
{
   ExecuteAsAdmin $TOUCH $1
   if [ $ADMINUSER != default ]; then
      ExecuteAsAdmin $CHMOD 666 $1
   fi
}

#-------------------------------------------------------------------------
# TruncCreateAndMakeWriteable
# delete $1 as file and make it writable for everybody
#
TruncCreateAndMakeWriteable()
{
   if [ -f $1 ]; then
      ExecuteAsAdmin $RM $1 
   fi
   CreateAndMakeWriteable $1
}

#--------------------------------------------------------------------------
# SetAdminUser
#   set ADMINUSER from global cluster config
#   exit if cluster config does not exist
#
SetAdminUser()
{
   cfgname=$SGE_ROOT/$SGE_CELL/common/bootstrap
 
   if [ -f $cfgname ]; then
      user=`env LC_ALL=C grep admin_user $cfgname | env LC_ALL=C awk '{ print $2 }'`
   else
      Translate 1 "Global cluster configuration >%s< doesn't exist. Exit." $cfgname
      exit 1
   fi
 
   if [ `echo "$user"| env LC_ALL=C tr "[A-Z]" "[a-z]"` = "none" ]; then
      ADMINUSER=default
   else
      ADMINUSER=$user
   fi
}