/*___INFO__MARK_BEGIN__*/
/*************************************************************************
 *
 *  The Contents of this file are made available subject to the terms of
 *  the Sun Industry Standards Source License Version 1.2
 *
 *  Sun Microsystems Inc., March, 2001
 *
 *
 *  Sun Industry Standards Source License Version 1.2
 *  =================================================
 *  The contents of this file are subject to the Sun Industry Standards
 *  Source License Version 1.2 (the "License"); You may not use this file
 *  except in compliance with the License. You may obtain a copy of the
 *  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
 *
 *  Software provided under this License is provided on an "AS IS" basis,
 *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
 *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
 *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
 *  See the License for the specific provisions governing your rights and
 *  obligations concerning the Software.
 *
 *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
 *
 *  Copyright: 2003 by Sun Microsystems, Inc.
 *
 *  All Rights Reserved.
 *
 ************************************************************************/
/*___INFO__MARK_END__*/

#include <signal.h>
#include <pthread.h>
#include <string.h>
#include <errno.h>
#include <fcntl.h>

#include "basis_types.h"
#include "sge_qmaster_threads.h"
#include "sgermon.h"
#include "sge_mt_init.h"
#include "sge_prog.h"
#include "sge_log.h"
#include "sge_unistd.h"
#include "sge_answer.h"
#include "setup_qmaster.h"
#include "sge_security.h"
#include "sge_manop.h"
#include "sge_mtutil.h"
#include "sge_lock.h"
#include "sge_qmaster_process_message.h"
#include "sge_event_master.h"
#include "sge_persistence_qmaster.h"
#include "sge_reporting_qmaster.h"
#include "sge_qmaster_timed_event.h"
#include "sge_host_qmaster.h"
#include "sge_userprj_qmaster.h"
#include "sge_give_jobs.h"
#include "sge_all_listsL.h"
#include "sge_calendar_qmaster.h"
#include "sge_time.h"
#include "lock.h"
#include "qmaster_heartbeat.h"
#include "shutdown.h"
#include "sge_spool.h"
#include "cl_commlib.h"
#include "sge_uidgid.h"
#include "sge_bootstrap.h"
#include "msg_common.h"
#include "msg_qmaster.h"
#include "msg_daemons_common.h"
#include "msg_utilib.h"  /* remove once 'sge_daemonize_qmaster' did become 'sge_daemonize' */
#include "sge.h"
#include "sge_qmod_qmaster.h"
#include "reschedule.h"
#include "sge_job_qmaster.h"
#include "sge_profiling.h"
#include "sgeobj/sge_conf.h"
#include "qm_name.h"
#include "setup_path.h"
#include "sge_advance_reservation_qmaster.h"
#include "sge_sched_process_events.h"
#include "sge_follow.h"

#include "gdi/sge_gdi_packet.h"

#include "uti/sge_os.h"
#include "uti/sge_thread_ctrl.h"

#include "sge_host_qmaster.h"
#include "sge_thread_main.h"
#include "sge_thread_timer.h"
#include "sge_qmaster_timed_event.h"
#include "sge_qmaster_heartbeat.h"
#include "sge_persistence_qmaster.h"
#include "sge_job_enforce_limit.h"

static void
sge_timer_cleanup_monitor(monitoring_t *monitor)
{
   DENTER(TOP_LAYER, "sge_timer_cleanup_monitor");
   sge_monitor_free(monitor);
   DRETURN_VOID;
}

/****** qmaster/sge_thread_timer/sge_timer_register_event_handler() *************
*  NAME
*     sge_timer_register_event_handler() -- register event handlers
*
*  SYNOPSIS
*     void sge_timer_register_event_handler(void) 
*
*  FUNCTION
*    registers event handlers
*
*  NOTES
*     MT-NOTE: sge_register_event_handler() is MT safe 
*
*  SEE ALSO
*     sge_thread_timer/sge_timer_start_periodic_tasks
*******************************************************************************/
void
sge_timer_register_event_handler(void)
{
   DENTER(TOP_LAYER, "sge_timer_register_event_handler");
   
   /* 
    * recurring events 
    */

   te_register_event_handler(sge_store_job_number, TYPE_JOB_NUMBER_EVENT);
      
   te_register_event_handler(sge_store_ar_id, TYPE_AR_ID_EVENT);

   te_register_event_handler(sge_load_value_cleanup_handler, TYPE_LOAD_VALUE_CLEANUP_EVENT);
         
   te_register_event_handler(sge_zombie_job_cleanup_handler, TYPE_ZOMBIE_JOB_CLEANUP_EVENT);
          
   te_register_event_handler(sge_automatic_user_cleanup_handler, TYPE_AUTOMATIC_USER_CLEANUP_EVENT);      

   te_register_event_handler(sge_security_event_handler, TYPE_SECURITY_EVENT);

   /* 
    * one time events
    */ 

   te_register_event_handler(sge_job_resend_event_handler, TYPE_JOB_RESEND_EVENT);

   te_register_event_handler(sge_job_enfoce_limit_handler, TYPE_ENFORCE_LIMIT_EVENT);
    
   te_register_event_handler(sge_calendar_event_handler, TYPE_CALENDAR_EVENT);

   te_register_event_handler(resend_signal_event, TYPE_SIGNAL_RESEND_EVENT);
    
   te_register_event_handler(reschedule_unknown_event, TYPE_RESCHEDULE_UNKNOWN_EVENT);
    
   te_register_event_handler(sge_ar_event_handler, TYPE_AR_EVENT);


   DRETURN_VOID;
}

/****** qmaster/sge_thread_timer/sge_timer_start_periodic_tasks() ************************
*  NAME
*     sge_timer_start_periodic_tasks() -- Start periodic qmaster tasks. 
*
*  SYNOPSIS
*     static void sge_timer_start_periodic_tasks(void) 
*
*  FUNCTION
*     Start periodic qmaster tasks. Periodic tasks are implemented as recurring
*     events. 
*
*  INPUTS
*     void - none 
*
*  RESULT
*     void - none 
*
*  NOTES
*     MT-NOTE: sge_start_periodic_tasks() is not MT safe 
*
*******************************************************************************/
void sge_timer_start_periodic_tasks(void)
{
   te_event_t ev = NULL;

   DENTER(TOP_LAYER, "sge_timer_start_periodic_tasks");

   /* recurring events */
   ev = te_new_event(15, TYPE_JOB_NUMBER_EVENT, RECURRING_EVENT, 0, 0, "job_number_changed");
   te_add_event(ev);
   te_free_event(&ev);

   ev = te_new_event(15, TYPE_AR_ID_EVENT, RECURRING_EVENT, 0, 0, "ar_id_changed");
   te_add_event(ev);
   te_free_event(&ev);

   ev = te_new_event(15, TYPE_LOAD_VALUE_CLEANUP_EVENT, RECURRING_EVENT, 0, 0, "load-value-cleanup");
   te_add_event(ev);
   te_free_event(&ev);

   ev = te_new_event(30, TYPE_ZOMBIE_JOB_CLEANUP_EVENT, RECURRING_EVENT, 0, 0, "zombie-job-cleanup");
   te_add_event(ev);
   te_free_event(&ev);

   ev = te_new_event(60, TYPE_AUTOMATIC_USER_CLEANUP_EVENT, RECURRING_EVENT, 0, 0, "automatic-user-cleanup");
   te_add_event(ev);
   te_free_event(&ev);

   ev = te_new_event(10, TYPE_SECURITY_EVENT, RECURRING_EVENT, 0, 0, "security-event");
   te_add_event(ev);
   te_free_event(&ev);

   DEXIT;
   return;
} 

void 
sge_timer_initialize(sge_gdi_ctx_class_t *ctx, monitoring_t *monitor)
{
   cl_thread_settings_t* dummy_thread_p = NULL;
   lList *answer_list = NULL;
   dstring thread_name = DSTRING_INIT;

   DENTER(TOP_LAYER, "sge_timer_initialize");

   te_init();
   DPRINTF(("timed event module has been initialized\n"));
   heartbeat_initialize();
   DPRINTF(("heartbeat module initialized\n"));
   ar_initialize_timer(ctx, &answer_list, monitor);
   answer_list_output(&answer_list);
   DPRINTF(("ar and corresponding timers are initialized\n"));
   calendar_initalize_timer(ctx, monitor);
   DPRINTF(("queue states and corresponding timers are initialized due to calendar settings\n"));
   host_initalitze_timer();
   DPRINTF(("reschedule unknown timer have been initialized\n"));
   sge_timer_register_event_handler();
   DPRINTF(("timer are registered at timed event module\n"));
   sge_timer_start_periodic_tasks();
   DPRINTF(("periodic tasks are registered at timed event module\n"));
   sge_initialize_persistance_timer();
   DPRINTF(("persistence timer initialized at timed event module\n"));
   sge_setup_job_resend();
   DPRINTF(("job resend functionality initialized\n"));
   sge_add_check_limit_trigger();
   DPRINTF(("added timer event to check load reports and possibly to enforce limits\n"));

   DPRINTF((SFN" related initialisation has been done\n", threadnames[TIMER_THREAD]));

   sge_dstring_sprintf(&thread_name, "%s%03d", threadnames[TIMER_THREAD], 0);
   cl_thread_list_setup(&(Main_Control.timer_thread_pool), "timer thread pool");
   cl_thread_list_create_thread(Main_Control.timer_thread_pool, &dummy_thread_p,
                                cl_com_get_log_list(), sge_dstring_get_string(&thread_name), 0, 
                                sge_timer_main, NULL, NULL, CL_TT_TIMER);
   sge_dstring_free(&thread_name);
   DRETURN_VOID;
}

void
sge_timer_terminate(void)
{
   cl_thread_settings_t* thread = NULL;

   DENTER(TOP_LAYER, "sge_timer_terminate");

   thread = cl_thread_list_get_first_thread(Main_Control.timer_thread_pool);
   while (thread != NULL) {
      DPRINTF(("getting canceled\n"));
      cl_thread_list_delete_thread(Main_Control.timer_thread_pool, thread);

      thread = cl_thread_list_get_first_thread(Main_Control.timer_thread_pool);
   }  
   DPRINTF(("all "SFN" threads terminated\n", threadnames[TIMER_THREAD]));

   te_shutdown();

   DPRINTF((SFN" related cleanup has been done\n", threadnames[TIMER_THREAD]));

   DRETURN_VOID;
}

/****** qmaster/sge_qmaster_timed_event/timed_event_thread() ***********************
*  NAME
*     timed_event_thread() -- Deliver timed events due
*
*  SYNOPSIS
*     static void* timed_event_thread(void* anArg) 
*
*  FUNCTION
*     Check whether system clock has been put back. If so, adjust event due
*     times. Check if event list does contain events. If so, fetch first event
*     and check whether it is due. If there is a due event, search event handler
*     table for a matching event handler and invoke it.
*
*     After event delivery an event with event mode 'ONE_TIME_EVENT' will be
*     removed. An event with event mode 'RECURRING_EVENT' will be delivered
*     repeatedly.
*
*     The event list MUST be sorted in ascending event due time order.
*
*  INPUTS
*     void* anArg - not used 
*
*  RESULT
*     void* - none 
*
*  NOTES
*     MT-NOTE: 'timed_event_thread()' is a thread function. Do NOT use this
*     MT-NOTE: function in any other way!
*     MT-NOTE:
*     MT-NOTE: If the event list is empty, 'timed_event_thread()' will wait until
*     MT-NOTE: an event has been added.
*     MT-NOTE: 
*     MT-NOTE: If no event is due, i.e. the due date of the next event does lie
*     MT-NOTE: ahead, 'timed_event_thread()' does wait until the next event does
*     MT-NOTE: become due, or an event which is due earlier has been added. If
*     MT-NOTE: an event has been deleted while waiting ('Event_Control.delete'
*     MT-NOTE: equals 'true'), skip the current event and start over. The
*     MT-NOTE: deleted event maybe the event 'timed_event_thread()' has been
*     MT-NOTE: waiting for.
*     MT-NOTE:
*     MT-NOTE: Before 'te_scan_table_and_deliver()' is invoked,
*     MT-NOTE: 'Event_Control.mutex' MUST be unlocked. Otherwise, a deadlock
*     MT-NOTE: may occur due to recursive mutex locking.
*
*******************************************************************************/
void *
sge_timer_main(void *arg)
{
   bool do_endlessly = true;
   cl_thread_settings_t *thread_config = (cl_thread_settings_t*)arg;
   sge_gdi_ctx_class_t *ctx = NULL;
   monitoring_t monitor;

   lListElem *le = NULL;
   te_event_t te = NULL;
   time_t now;
   time_t next_prof_output = 0;

   DENTER(TOP_LAYER, "sge_timer_main");

   DPRINTF(("started"));
   cl_thread_func_startup(thread_config);
   sge_monitor_init(&monitor, thread_config->thread_name, TET_EXT, TET_WARNING, TET_ERROR);
   sge_qmaster_thread_init(&ctx, QMASTER, TIMER_THREAD, true);

   /* register at profiling module */
   set_thread_name(pthread_self(), "TEvent Thread");
   conf_update_thread_profiling("TEvent Thread");
 
   while (do_endlessly) {
      int execute = 0;

      thread_start_stop_profiling();

      sge_mutex_lock("event_control_mutex", SGE_FUNC, __LINE__, &Event_Control.mutex);
      
      te_check_time(time(NULL));
      
      Event_Control.last = time(NULL);
      
      MONITOR_IDLE_TIME(te_wait_empty(), (&monitor), mconf_get_monitor_time(),
                        mconf_is_monitor_message());
      MONITOR_MESSAGES((&monitor));

      MONITOR_TET_COUNT((&monitor));
      MONITOR_TET_EVENT((&monitor), lGetNumberOfElem(Event_Control.list));

      le = lFirst(Event_Control.list);
      te = te_event_from_list_elem(le);
      now = Event_Control.next = time(NULL);

      if (te->when > now) {
         
         Event_Control.next = te->when;
         Event_Control.delete = false;
         MONITOR_IDLE_TIME(te_wait_next(te, now), (&monitor), mconf_get_monitor_time(),
                           mconf_is_monitor_message());

         if ((Event_Control.next < te->when) || (Event_Control.delete == true))
         {
            DPRINTF(("%s: event list changed - next:"sge_u32" --> start over\n", SGE_FUNC, 
                     Event_Control.next));

            sge_mutex_unlock("event_control_mutex", SGE_FUNC, __LINE__, &Event_Control.mutex);

            te_free_event(&te);
            sge_monitor_output(&monitor);
            continue;
         }
      }

      MONITOR_TET_EXEC((&monitor));

      lDechainElem(Event_Control.list, le);

      sge_mutex_unlock("event_control_mutex", SGE_FUNC, __LINE__, &Event_Control.mutex);

      lFreeElem(&le);

      te_scan_table_and_deliver(ctx, te, &monitor);
      te_free_event(&te);

      sge_monitor_output(&monitor);
      thread_output_profiling("timed event thread profiling summary:\n",
                              &next_prof_output);

      /* pthread cancelation point */
      do {
         pthread_cleanup_push((void (*)(void *))sge_timer_cleanup_monitor,
                              (void *)&monitor);
         cl_thread_func_testcancel(thread_config);
         pthread_cleanup_pop(execute); 
         if (sge_thread_has_shutdown_started()) {
            DPRINTF(("waiting for termination\n"));
            sleep(1);
         }
      } while (sge_thread_has_shutdown_started());
   }

   /*
    * Don't add cleanup code here. It will never be executed. Instead register
    * a cleanup function with pthread_cleanup_push()/pthread_cleanup_pop() before 
    * and after the call of cl_thread_func_testcancel()
    */

   DRETURN(NULL);
}