#___INFO__MARK_BEGIN__
##########################################################################
#
#  The Contents of this file are made available subject to the terms of
#  the Sun Industry Standards Source License Version 1.2
#
#  Sun Microsystems Inc., March, 2001
#
#
#  Sun Industry Standards Source License Version 1.2
#  =================================================
#  The contents of this file are subject to the Sun Industry Standards
#  Source License Version 1.2 (the "License"); You may not use this file
#  except in compliance with the License. You may obtain a copy of the
#  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
#
#  Software provided under this License is provided on an "AS IS" basis,
#  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
#  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
#  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
#  See the License for the specific provisions governing your rights and
#  obligations concerning the Software.
#
#  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
#
#  Copyright: 2001 by Sun Microsystems, Inc.
#
#  All Rights Reserved.
#
##########################################################################
#___INFO__MARK_END__
#-------------------------------------------------
# SGE default configuration file
#-------------------------------------------------

# Use always fully qualified pathnames, please

# SGE_ROOT Path, this is basic information
#(mandatory for qmaster and execd installation)
SGE_ROOT=${cfg.sge.root}

# SGE_QMASTER_PORT is used by qmaster for communication
# Please enter the port in this way: 1300
# Please do not this: 1300/tcp
#(mandatory for qmaster installation)
SGE_QMASTER_PORT=${cfg.sge.qmaster.port}

# SGE_EXECD_PORT is used by execd for communication
# Please enter the port in this way: 1300
# Please do not this: 1300/tcp
#(mandatory for qmaster installation)
SGE_EXECD_PORT=${cfg.sge.execd.port}

# SGE_ENABLE_SMF
# if set to false SMF will not control SGE services
SGE_ENABLE_SMF=${cfg.sge.enable.smf}

# SGE_CLUSTER_NAME
# Name of this cluster (used by SMF as an service instance name)
SGE_CLUSTER_NAME=${cfg.sge.cluster.name}

# SGE_JMX_PORT is used by qmasters JMX MBean server
# mandatory if install_qmaster -jmx -auto <cfgfile>
# range: 1-65500 
SGE_JMX_PORT=${cfg.sge.jmx.port}

# SGE_JMX_SSL is used by qmasters JMX MBean server
# if SGE_JMX_SSL=true, the mbean server connection uses
# SSL authentication
SGE_JMX_SSL=${cfg.sge.jmx.ssl}

# SGE_JMX_SSL_CLIENT is used by qmasters JMX MBean server
# if SGE_JMX_SSL_CLIENT=true, the mbean server connection uses
# SSL authentication of the client in addition
SGE_JMX_SSL_CLIENT=${cfg.sge.jmx.ssl.client}

# SGE_JMX_SSL_KEYSTORE is used by qmasters JMX MBean server
# if SGE_JMX_SSL=true the server keystore found here is used
# e.g. /var/sgeCA/port${cfg.sge.qmaster.port}/${cfg.cell.name}/private/keystore
SGE_JMX_SSL_KEYSTORE=${cfg.sge.jmx.ssl.keystore}

# SGE_JMX_SSL_KEYSTORE_PW is used by qmasters JMX MBean server
# password for the SGE_JMX_SSL_KEYSTORE file
SGE_JMX_SSL_KEYSTORE_PW=${cfg.sge.jmx.ssl.keystore.pw}

# SGE_JVM_LIB_PATH is used by qmasters jvm thread 
# path to libjvm.so
# mandatory if install_qmaster -jmx -auto <cfgfile>
SGE_JVM_LIB_PATH=${cfg.sge.jvm.lib.path}

# SGE_ADDITIONAL_JVM_ARGS is used by qmasters jvm thread 
# jvm specific arguments as -verbose:jni etc.
# optional, can be empty
SGE_ADDITIONAL_JVM_ARGS=${cfg.sge.additional.jvm.args}

# CELL_NAME, will be a dir in SGE_ROOT, contains the common dir
# Please enter only the name of the cell. No path, please
#(mandatory for qmaster and execd installation)
CELL_NAME=${cfg.cell.name}

# ADMIN_USER, if you want to use a different admin user than the owner,
# of SGE_ROOT, you have to enter the user name, here
# Leaving this blank, the owner of the SGE_ROOT dir will be used as admin user
ADMIN_USER=${cfg.admin.user}

# The dir, where qmaster spools this parts, which are not spooled by DB
#(mandatory for qmaster installation)
QMASTER_SPOOL_DIR=${cfg.qmaster.spool.dir}

# The dir, where the execd spools (active jobs)
# This entry is needed, even if your are going to use
# berkeley db spooling. Only cluster configuration and jobs will
# be spooled in the database. The execution daemon still needs a spool
# directory  
#(mandatory for qmaster installation)
EXECD_SPOOL_DIR=${cfg.execd.spool.dir}

# For monitoring and accounting of jobs, every job will get
# unique GID. So you have to enter a free GID Range, which
# is assigned to each job running on a machine.
# If you want to run 100 Jobs at the same time on one host you
# have to enter a GID-Range like that: 16000-16100
#(mandatory for qmaster installation)
GID_RANGE=${cfg.gid.range}

# If SGE is compiled with -spool-dynamic, you have to enter here, which
# spooling method should be used. (classic or berkeleydb)
#(mandatory for qmaster installation)
SPOOLING_METHOD=${cfg.spooling.method}

# Name of the Server, where the Spooling DB is running on
# if spooling methode is berkeleydb, it must be "none", when
# using no spooling server and it must contain the servername
# if a server should be used. In case of "classic" spooling,
# can be left out
DB_SPOOLING_SERVER=${cfg.db.spooling.server}

# The dir, where the DB spools
# If berkeley db spooling is used, it must contain the path to
# the spooling db. Please enter the full path. (eg. /tmp/data/spooldb)
# Remember, this directory must be local on the qmaster host or on the
# Berkeley DB Server host. No NFS mount, please
DB_SPOOLING_DIR=${cfg.db.spooling.dir}

# This parameter set the number of parallel installation processes.
# The prevent a system overload, or exeeding the number of open file
# descriptors the user can limit the number of parallel install processes.
# eg. set PAR_EXECD_INST_COUNT="20", maximum 20 parallel execd are installed.
PAR_EXECD_INST_COUNT=${cfg.par.execd.inst.count}

# A List of Host which should become admin hosts
# If you do not enter any host here, you have to add all of your hosts
# by hand, after the installation. The autoinstallation works without
# any entry
ADMIN_HOST_LIST="${cfg.admin.host.list}"

# A List of Host which should become submit hosts
# If you do not enter any host here, you have to add all of your hosts
# by hand, after the installation. The autoinstallation works without
# any entry
SUBMIT_HOST_LIST="${cfg.submit.host.list}"

# A List of Host which should become exec hosts
# If you do not enter any host here, you have to add all of your hosts
# by hand, after the installation. The autoinstallation works without
# any entry
# (mandatory for execution host installation)
EXEC_HOST_LIST="${cfg.exec.host.list}"

# The dir, where the execd spools (local configuration)
# If you want configure your execution daemons to spool in
# a local directory, you have to enter this directory here.
# If you do not want to configure a local execution host spool directory
# please leave this empty
EXECD_SPOOL_DIR_LOCAL=${cfg.exec.spool.dir.local}

# If true, the domainnames will be ignored, during the hostname resolving
# if false, the fully qualified domain name will be used for name resolving
HOSTNAME_RESOLVING=${cfg.hostname.resolving}

# Shell, which should be used for remote installation (rsh/ssh)
# This is only supported, if your hosts and rshd/sshd is configured,
# not to ask for a password, or promting any message.
SHELL_NAME=${cfg.shell.name}

# This remote copy command is used for csp installation.
# The script needs the remote copy command for distributing
# the csp certificates. Using ssl the command scp has to be entered,
# using  the not so secure rsh the command rcp has to be entered.
# Both need a passwordless ssh/rsh connection to the hosts, which
# should be connected to. (mandatory for csp installation mode)
COPY_COMMAND=${cfg.copy.command}

# Enter your default domain, if you are using /etc/hosts or NIS configuration
DEFAULT_DOMAIN=${cfg.default.domain}

# If a job stops, fails, finish, you can send a mail to this adress
ADMIN_MAIL=${cfg.admin.mail}

# If true, the rc scripts (sgemaster, sgeexecd, sgebdb) will be added,
# to start automatically during boottime
ADD_TO_RC=${cfg.add.to.rc}

#If this is "true" the file permissions of executables will be set to 755
#and of ordenary file to 644.  
SET_FILE_PERMS=${cfg.set.file.perms}

# This option is not implemented, yet.
# When a exechost should be uninstalled, the running jobs will be rescheduled
RESCHEDULE_JOBS="wait"

# Enter a one of the three distributed scheduler tuning configuration sets
# (1=normal, 2=high, 3=max)
SCHEDD_CONF=${cfg.schedd.conf}

# The name of the shadow host. This host must have read/write permission
# to the qmaster spool directory
# If you want to setup a shadow host, you must enter the servername
# (mandatory for shadowhost installation)
SHADOW_HOST="${cfg.shadow.host}"

# Remove this execution hosts in automatic mode
# (mandatory for unistallation of execution hosts)
EXEC_HOST_LIST_RM="${cfg.exec.host.list.rm}"

# This option is used for startup script removing. 
# If true, all rc startup scripts will be removed during
# automatic deinstallation. If false, the scripts won't
# be touched.
# (mandatory for unistallation of execution/qmaster hosts)
REMOVE_RC=${cfg.remove.rc}

# This is a Windows specific part of the auto isntallation template
# If you going to install windows executions hosts, you have to enable the
# windows support. To do this, please set the WINDOWS_SUPPORT variable
# to "true". ("false" is disabled)
# (mandatory for qmaster installation, by default WINDOWS_SUPPORT is
# disabled)
WINDOWS_SUPPORT=${cfg.windows.support}

# Enabling the WINDOWS_SUPPORT, recommends the following parameter.
# The WIN_ADMIN_NAME will be added to the list of SGE managers.
# Without adding the WIN_ADMIN_NAME the execution host installation
# won't install correctly.
# WIN_ADMIN_NAME is set to "Administrator" which is default on most
# Windows systems. In some cases the WIN_ADMIN_NAME can be prefixed with
# the windows domain name (eg. DOMAIN+Administrator)
# (mandatory for qmaster installation, if windows hosts should be installed)
WIN_ADMIN_NAME=${cfg.win.admin.name}

# This parameter is used to switch between local ADMINUSER and Windows
# Domain Adminuser. Setting the WIN_DOMAIN_ACCESS variable to true, the
# Adminuser will be a Windows Domain User. It is recommended that 
# a Windows Domain Server is configured and the Windows Domain User is
# created. Setting this variable to false, the local Adminuser will be
# used as ADMINUSER. The install script tries to create this user account
# but we recommend, because it will be saver, to create this user, 
# before running the installation. 
# (mandatory for qmaster installation, if windows hosts should be installed)
WIN_DOMAIN_ACCESS=${cfg.win.domain.access}

# This section is used for csp installation mode.
# CSP_RECREATE recreates the certs on each installtion, if true.
# In case of false, the certs will be created, if not existing.
# Existing certs won't be overwritten. (mandatory for csp install)
CSP_RECREATE=${cfg.csp.recreate}

# The created certs won't be copied, if this option is set to false
# If true, the script tries to copy the generated certs. This
# requires passwordless ssh/rsh access for user root to the
# execution hosts
CSP_COPY_CERTS=${cfg.csp.copy.certs}

# csp information, your country code (only 2 characters)
# (mandatory for csp install)
CSP_COUNTRY_CODE=${cfg.csp.country.code}

# your state (mandatory for csp install)
CSP_STATE=${cfg.csp.state}

# your location, eg. the building (mandatory for csp install)
CSP_LOCATION=${cfg.csp.location}

# your arganisation (mandatory for csp install)
CSP_ORGA=${cfg.csp.orga}

# your organisation unit (mandatory for csp install)
CSP_ORGA_UNIT=${cfg.csp.orga.unit}

# your email (mandatory for csp install)
CSP_MAIL_ADDRESS=${cfg.csp.mail.address}