# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright © 2009-2010 INRIA. All rights reserved. # Copyright © 2009-2011 Université Bordeaux 1 # Copyright © 2009-2010 Cisco Systems, Inc. All rights reserved. # See COPYING in top-level directory. VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = tests/linux DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/hwloc-gather-topology.in \ $(srcdir)/test-topology.sh.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/config/hwloc.m4 \ $(top_srcdir)/config/hwloc_check_attributes.m4 \ $(top_srcdir)/config/hwloc_check_visibility.m4 \ $(top_srcdir)/config/hwloc_internal.m4 \ $(top_srcdir)/config/hwloc_pkg.m4 \ $(top_srcdir)/config/libtool.m4 \ $(top_srcdir)/config/ltoptions.m4 \ $(top_srcdir)/config/ltsugar.m4 \ $(top_srcdir)/config/ltversion.m4 \ $(top_srcdir)/config/lt~obsolete.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/include/private/autogen/config.h \ $(top_builddir)/include/hwloc/autogen/config.h CONFIG_CLEAN_FILES = hwloc-gather-topology test-topology.sh CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(bindir)" SCRIPTS = $(bin_SCRIPTS) AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BASH = @BASH@ BUNZIPP = @BUNZIPP@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CONFIGURE_DEPENDENCIES = @CONFIGURE_DEPENDENCIES@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOXYGEN = @DOXYGEN@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EPSTOPDF = @EPSTOPDF@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ FIG2DEV = @FIG2DEV@ GREP = @GREP@ GS = @GS@ HWLOC_CAIRO_CFLAGS = @HWLOC_CAIRO_CFLAGS@ HWLOC_CAIRO_LIBS = @HWLOC_CAIRO_LIBS@ HWLOC_CFLAGS = @HWLOC_CFLAGS@ HWLOC_CPPFLAGS = @HWLOC_CPPFLAGS@ HWLOC_DIFF_U = @HWLOC_DIFF_U@ HWLOC_EMBEDDED_CFLAGS = @HWLOC_EMBEDDED_CFLAGS@ HWLOC_EMBEDDED_CPPFLAGS = @HWLOC_EMBEDDED_CPPFLAGS@ HWLOC_EMBEDDED_LDADD = @HWLOC_EMBEDDED_LDADD@ HWLOC_EMBEDDED_LIBS = @HWLOC_EMBEDDED_LIBS@ HWLOC_HAVE_XML = @HWLOC_HAVE_XML@ HWLOC_KERRIGHED_CFLAGS = @HWLOC_KERRIGHED_CFLAGS@ HWLOC_KERRIGHED_LIBS = @HWLOC_KERRIGHED_LIBS@ HWLOC_LDFLAGS = @HWLOC_LDFLAGS@ HWLOC_LIBS = @HWLOC_LIBS@ HWLOC_LINUX_LIBNUMA_LIBS = @HWLOC_LINUX_LIBNUMA_LIBS@ HWLOC_MS_LIB = @HWLOC_MS_LIB@ HWLOC_PKG_CONFIG = @HWLOC_PKG_CONFIG@ HWLOC_RELEASE_DATE = @HWLOC_RELEASE_DATE@ HWLOC_REQUIRES = @HWLOC_REQUIRES@ HWLOC_SVN_R = @HWLOC_SVN_R@ HWLOC_TERMCAP_LIBS = @HWLOC_TERMCAP_LIBS@ HWLOC_VERSION = @HWLOC_VERSION@ HWLOC_W3_GENERATOR = @HWLOC_W3_GENERATOR@ HWLOC_X11_LIBS = @HWLOC_X11_LIBS@ HWLOC_XML_CFLAGS = @HWLOC_XML_CFLAGS@ HWLOC_XML_LIBS = @HWLOC_XML_LIBS@ HWLOC_top_builddir = @HWLOC_top_builddir@ HWLOC_top_srcdir = @HWLOC_top_srcdir@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LYNX = @LYNX@ MAKEINDEX = @MAKEINDEX@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PDFLATEX = @PDFLATEX@ RANLIB = @RANLIB@ SED = @SED@ SED_I = @SED_I@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ W3M = @W3M@ XMKMF = @XMKMF@ XMLLINT = @XMLLINT@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ libhwloc_so_version = @libhwloc_so_version@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CFLAGS = $(HWLOC_CFLAGS) AM_CPPFLAGS = $(HWLOC_CPPFLAGS) AM_LDFLAGS = $(HWLOC_LDFLAGS) # Add your expected output file here. # By default, it shows the output of `lstopo - -v'. sysfs_outputs = \ 2amd64-2n.output \ 2ps3-2t.output \ 4ia64-4s.output \ 4ppc-4c.output \ 256ppc-8n8s4t.output \ 256ppc-8n8s4t-nocache.output \ 256ppc-8n8s4t-nosys.output \ 32amd64-4s2n4c-cgroup.output \ 32ppc-4n4c2c.output \ 8amd64-4n2c.output \ 8em64t-4c2t.output \ 8em64t-2s2ca2c.output \ 8em64t-2s4c-heterogeneous.output \ 8ia64-2n2s2c.output \ 8ia64-2s2c2t.output \ 8ia64-4s2c.output \ 16amd64-8n2c.output \ 16amd64-8n2c-cpusets.output \ 16amd64-8n2c-cpusets.xml.output \ 16amd64-8n2c-cpusets_noadmin.output \ 16em64t-4s2cu2c.output \ 16em64t-4s2c2t.output \ 16em64t-4s2c2t-offlines.output \ 16em64t-4s2c2t-offlines.xml.output \ 16em64t-4s2c2t-offlines_noadmin.output \ 16em64t-4s2c2t_ncaches.output \ 16em64t-4s2c2t_merge.output \ 16em64t-4s2c2t.xml.output \ 16em64t-2m4c2t.output \ 16ia64-8n2s.output \ 48amd64-4d2n6c-sparse.output \ 64fake-4n2s2ca2c2t.output \ 96em64t-4n4d3ca2co.output \ 128ia64-17n4s2c.output \ 256ia64-64n2s2c.output \ 4qs22-2s2t.output \ 2s390-2c.output \ 1alpha.output # Each output `xyz.output' must have a corresponding tarball `xyz.tar.bz2' # or a corresponding `xyz.source' specifying which tarball to use sysfs_tarballs = \ 2amd64-2n.tar.bz2 \ 2ps3-2t.tar.bz2 \ 4ia64-4s.tar.bz2 \ 4ppc-4c.tar.bz2 \ 256ppc-8n8s4t.tar.bz2 \ 256ppc-8n8s4t-nocache.source \ 256ppc-8n8s4t-nosys.source \ 32amd64-4s2n4c-cgroup.tar.bz2 \ 32ppc-4n4c2c.tar.bz2 \ 8amd64-4n2c.tar.bz2 \ 8em64t-4c2t.tar.bz2 \ 8em64t-2s2ca2c.tar.bz2 \ 8em64t-2s4c-heterogeneous.tar.bz2 \ 8ia64-2n2s2c.tar.bz2 \ 8ia64-2s2c2t.tar.bz2 \ 8ia64-4s2c.tar.bz2 \ 16amd64-8n2c.tar.bz2 \ 16amd64-8n2c-cpusets.tar.bz2 \ 16amd64-8n2c-cpusets.xml.source \ 16amd64-8n2c-cpusets_noadmin.source \ 16em64t-4s2cu2c.tar.bz2 \ 16em64t-4s2c2t.tar.bz2 \ 16em64t-4s2c2t-offlines.tar.bz2 \ 16em64t-4s2c2t-offlines.xml.source \ 16em64t-4s2c2t-offlines_noadmin.source \ 16em64t-2m4c2t.tar.bz2 \ 16em64t-4s2c2t_merge.source \ 16em64t-4s2c2t_ncaches.source \ 16em64t-4s2c2t.xml.source \ 16ia64-8n2s.tar.bz2 \ 48amd64-4d2n6c-sparse.tar.bz2 \ 64fake-4n2s2ca2c2t.tar.bz2 \ 96em64t-4n4d3ca2co.tar.bz2 \ 128ia64-17n4s2c.tar.bz2 \ 256ia64-64n2s2c.tar.bz2 \ 4qs22-2s2t.tar.bz2 \ 2s390-2c.tar.bz2 \ 1alpha.tar.bz2 # Each `xyz.output' may have a corresponding exclude `xyz.exclude' sysfs_excludes = \ 256ppc-8n8s4t-nocache.exclude \ 256ppc-8n8s4t-nosys.exclude # Each output `xyz.output' may have a corresponding `xyz.options' # file modifying the behavior of lstopo sysfs_options = \ 16amd64-8n2c-cpusets.xml.options \ 16amd64-8n2c-cpusets_noadmin.options \ 16em64t-4s2c2t-offlines.xml.options \ 16em64t-4s2c2t-offlines_noadmin.options \ 16em64t-4s2c2t_ncaches.options \ 16em64t-4s2c2t_merge.options \ 16em64t-4s2c2t.xml.options @HWLOC_BUILD_TESTS_TRUE@@HWLOC_HAVE_BUNZIPP_TRUE@@HWLOC_HAVE_OPENAT_TRUE@TESTS = $(sysfs_outputs) EXTRA_DIST = $(sysfs_outputs) $(sysfs_tarballs) $(sysfs_excludes) $(sysfs_options) TESTS_ENVIRONMENT = $(builddir)/test-topology.sh bin_SCRIPTS = hwloc-gather-topology SUBDIRS = gather all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/linux/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign tests/linux/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): hwloc-gather-topology: $(top_builddir)/config.status $(srcdir)/hwloc-gather-topology.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ test-topology.sh: $(top_builddir)/config.status $(srcdir)/test-topology.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ *) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ *) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ echo "$$grn$$dashes"; \ else \ echo "$$red$$dashes"; \ fi; \ echo "$$banner"; \ test -z "$$skipped" || echo "$$skipped"; \ test -z "$$report" || echo "$$report"; \ echo "$$dashes$$std"; \ test "$$failed" -eq 0; \ else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-recursive all-am: Makefile $(SCRIPTS) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-binSCRIPTS @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binSCRIPTS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \ ctags-recursive install-am install-exec-am install-strip \ tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean clean-generic \ clean-libtool ctags ctags-recursive distclean \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-binSCRIPTS install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-exec-hook \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-binSCRIPTS install-exec-hook: $(SED) -e 's/abs_top_builddir\/utils/bindir/' -e '/abs_top_builddir/d' -i $(DESTDIR)$(bindir)/hwloc-gather-topology # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: