/*___INFO__MARK_BEGIN__*/
/*************************************************************************
 * 
 *  The Contents of this file are made available subject to the terms of
 *  the Sun Industry Standards Source License Version 1.2
 * 
 *  Sun Microsystems Inc., March, 2001
 * 
 * 
 *  Sun Industry Standards Source License Version 1.2
 *  =================================================
 *  The contents of this file are subject to the Sun Industry Standards
 *  Source License Version 1.2 (the "License"); You may not use this file
 *  except in compliance with the License. You may obtain a copy of the
 *  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
 * 
 *  Software provided under this License is provided on an "AS IS" basis,
 *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
 *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
 *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
 *  See the License for the specific provisions governing your rights and
 *  obligations concerning the Software.
 * 
 *   The Initial Developer of the Original Code is: Sun Microsystems, Inc.
 * 
 *   Copyright: 2003 by Sun Microsystems, Inc.
 * 
 *   All Rights Reserved.
 * 
 ************************************************************************/
/*___INFO__MARK_END__*/

#include <stdlib.h>
#include <string.h>
#include <pthread.h>
#include <dlfcn.h>

#if defined(LINUX) || defined(AIX43) || defined(AIX51) || defined(IRIX) || defined(SOLARIS) || defined(HP11)
#  include <malloc.h>
#endif

#include "uti/sge_monitor.h"

#include "rmon/sgermon.h"

#include "lck/sge_mtutil.h"

#include "uti/sge_dstring.h"
#include "uti/sge_time.h"
#include "uti/sge_log.h"
#include "uti/msg_utilib.h"


/*************************************************
 * 
 * structure definition to hand the threading 
 * information over to the comlib
 *
 **************************************************/

typedef struct {
   const char       *name;           /* thread name */
   struct timeval   last_wait_time;  /* last wait time, last time when one thread loop finished */
   thread_warning_t warning_timeout; /* how long can the thread be blocked before a warning is shown */
   thread_error_t   error_timeout;   /* how long can the thread be blocked before an error is shown */
   time_t           update_time;     /* last update time */
   dstring*         output;          /* thread specific info line */
   pthread_mutex_t  Output_Mutex;    /* gards one line */
}Output_t;

#define MAX_OUTPUT_LINES 10           /* number of threads to monitor, currently 10 threads at max
                                         at the same time*/
static Output_t Output[MAX_OUTPUT_LINES] = {
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                             {NULL, {0,0}, NO_WARNING, NO_ERROR, 0, NULL, PTHREAD_MUTEX_INITIALIZER},
                                           };

/* global mutex used for mallinfo initialisation and also used to access the Info_Line string */
static pthread_mutex_t global_mutex = PTHREAD_MUTEX_INITIALIZER; 

/* a static dstring used as a temporary buffer to build the commlib info string */
static dstring Info_Line= DSTRING_INIT;

/* mallinfo related data */
#if defined(LINUX) || defined(AIX43) || defined(AIX51) || defined(IRIX) || defined(SOLARIS) || defined(HP11)
static bool mallinfo_initialized = false;
static void *mallinfo_shlib_handle = NULL;
static struct mallinfo (*mallinfo_func_pointer)(void) = NULL;
#endif

/***********************************************
 * static functin def. for special extensions 
 ***********************************************/

static void ext_gdi_output(dstring *message, void *monitoring_extension, double time);
static void ext_lis_output(dstring *message, void *monitoring_extension, double time);
static void ext_edt_output(dstring *message, void *monitoring_extension, double time);
static void ext_tet_output(dstring *message, void *monitoring_extension, double time);
static void ext_sch_output(dstring *message, void *monitoring_extension, double time);

/************************************************
 * implementation
 ************************************************/


/****** uti/monitor/sge_monitor_free() *****************************************
*  NAME
*     sge_monitor_free() -- frees the monitoring data structure
*
*  SYNOPSIS
*     void sge_monitor_free(monitoring_t *monitor) 
*
*  FUNCTION
*     removes the line for the commlib output, and frees memory in the 
*     monitoring structure
*
*  INPUTS
*     monitoring_t *monitor - monitoring strucutre
*
*  NOTES
*     MT-NOTE: sge_monitor_free() is MT safe 
*
*******************************************************************************/
void sge_monitor_free(monitoring_t *monitor)
{
   DENTER(GDI_LAYER, "sge_monitor_free");
  
   sge_dstring_free(monitor->output_line1);
   sge_dstring_free(monitor->output_line2);
   FREE(monitor->output_line1);
   FREE(monitor->output_line2);
   FREE(monitor->ext_data);

   if(monitor->pos != -1) {
      sge_mutex_lock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[monitor->pos].Output_Mutex));

      Output[monitor->pos].output = NULL;
      Output[monitor->pos].name = NULL;
      Output[monitor->pos].warning_timeout = NO_WARNING;
      Output[monitor->pos].error_timeout = NO_ERROR;
   
      sge_mutex_unlock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[monitor->pos].Output_Mutex));
   }

   
/*   sge_dstring_free(monitor->output_line1);
   sge_dstring_free(monitor->output_line2);
   FREE(monitor->output_line1);
   FREE(monitor->output_line2);
   FREE(monitor->ext_data);*/

   monitor->ext_data_size = 0;
   monitor->ext_output = NULL;
   monitor->ext_type = NONE_EXT;
   monitor->monitor_time = 0;
   monitor->pos = -1;
   monitor->output = false;
   monitor->work_line = NULL;
   monitor->thread_name = NULL;

#if defined(LINUX) || defined(AIX43) || defined(AIX51) || defined(IRIX) || defined(SOLARIS) || defined(HP11)
   sge_mutex_lock("sge_monitor_status", SGE_FUNC, __LINE__, &global_mutex);
   if (mallinfo_shlib_handle != NULL) {  
      dlclose(mallinfo_shlib_handle);
      mallinfo_shlib_handle = NULL;
   }
   sge_mutex_unlock("sge_monitor_status", SGE_FUNC, __LINE__, &global_mutex);
#endif
 
   DEXIT;
}

/****** uti/monitor/sge_monitor_init() *****************************************
*  NAME
*     sge_monitor_init() -- init the monitoring structure
*
*  SYNOPSIS
*     void sge_monitor_init(monitoring_t *monitor, const char *thread_name, 
*     extension_t ext, thread_warning_t warning_timeout, thread_error_t 
*     error_timeout) 
*
*  FUNCTION
*     Sets the default values and inits the structure, finds the line pos
*     for the comlib output
*
*  INPUTS
*     monitoring_t *monitor            - monitoring strucutre
*     const char *thread_name          - the thread name
*     extension_t ext                  - the extension time (-> enum)
*     thread_warning_t warning_timeout - the warning timeout (-> enum)
*     thread_error_t error_timeout     - the error timeout (-> enum)
*
*  NOTES
*     MT-NOTE: sge_monitor_init() is MT safe 
*
*******************************************************************************/
void
sge_monitor_init(monitoring_t *monitor, const char *thread_name, extension_t ext, 
                 thread_warning_t warning_timeout, thread_error_t error_timeout)
{
   DENTER(GDI_LAYER, "sge_monitor_init");

   /*
    * initialize the mallinfo function pointer if it is available
    */
#if defined(LINUX) || defined(AIX43) || defined(AIX51) || defined(IRIX) || defined(SOLARIS) || defined(HP11)
   sge_mutex_lock("sge_monitor_status", SGE_FUNC, __LINE__, &global_mutex);
   if (mallinfo_initialized == false) {
      const char *function_name = "mallinfo";

      mallinfo_initialized = true;
#  ifdef RTLD_NODELETE
      mallinfo_shlib_handle = dlopen(NULL, RTLD_LAZY | RTLD_NODELETE);
#  else
      mallinfo_shlib_handle = dlopen(NULL, RTLD_LAZY );
#  endif /* RTLD_NODELETE */

      if (mallinfo_shlib_handle != NULL) {
         mallinfo_func_pointer = (struct mallinfo (*)(void)) dlsym(mallinfo_shlib_handle, function_name);
      }
   }
   sge_mutex_unlock("sge_monitor_status", SGE_FUNC, __LINE__, &global_mutex);
#endif

   monitor->thread_name = thread_name;
 
   monitor->output_line1 = (dstring*) malloc(sizeof(dstring));
   monitor->output_line2 = (dstring*) malloc(sizeof(dstring));
   
   if (monitor->output_line1 == NULL || monitor->output_line2 == NULL) {
      CRITICAL((SGE_EVENT, MSG_UTI_MONITOR_MEMERROR)); 
      exit(1);
   } 

   memset(monitor->output_line1, 0, sizeof(dstring));
   memset(monitor->output_line2, 0, sizeof(dstring));
   
   sge_dstring_append(monitor->output_line1, thread_name);
   sge_dstring_append(monitor->output_line1, MSG_UTI_MONITOR_NODATA);
   sge_dstring_clear(monitor->output_line2);
   monitor->work_line = monitor->output_line2;
 
   switch(ext) {
      case SCH_EXT :
            monitor->ext_data = malloc(sizeof(m_sch_t));
            if (monitor->ext_data != NULL) {
               monitor->ext_type = SCH_EXT;
               monitor->ext_data_size = sizeof(m_sch_t);
               monitor->ext_output = &ext_sch_output;
            } else {
               monitor->ext_type = NONE_EXT;
               ERROR((SGE_EVENT, MSG_UTI_MONITOR_MEMERROREXT));
            }
         break;

      case GDI_EXT :
            monitor->ext_data = malloc(sizeof(m_gdi_t));
            if (monitor->ext_data != NULL) {
               monitor->ext_type = GDI_EXT;
               monitor->ext_data_size = sizeof(m_gdi_t);
               monitor->ext_output = &ext_gdi_output;
            } else {
               monitor->ext_type = NONE_EXT;
               ERROR((SGE_EVENT, MSG_UTI_MONITOR_MEMERROREXT));
            }
         break;

      case LIS_EXT :
            monitor->ext_data = malloc(sizeof(m_lis_t));
            if (monitor->ext_data != NULL) {
               monitor->ext_type = LIS_EXT;
               monitor->ext_data_size = sizeof(m_lis_t);
               monitor->ext_output = &ext_lis_output;
            } else {
               monitor->ext_type = NONE_EXT;
               ERROR((SGE_EVENT, MSG_UTI_MONITOR_MEMERROREXT));
            }
         break;
         
      case EDT_EXT : 
            monitor->ext_data = malloc(sizeof(m_edt_t));
            if (monitor->ext_data != NULL) {
               monitor->ext_type = EDT_EXT;
               monitor->ext_data_size = sizeof(m_edt_t);
               monitor->ext_output = &ext_edt_output;
            } else {
               monitor->ext_type = NONE_EXT;
               ERROR((SGE_EVENT, MSG_UTI_MONITOR_MEMERROREXT));
            }
         break;
       
      case TET_EXT : 
            monitor->ext_data = malloc(sizeof(m_tet_t));
            if (monitor->ext_data != NULL) {
               monitor->ext_type = TET_EXT;
               monitor->ext_data_size = sizeof(m_tet_t);
               monitor->ext_output = &ext_tet_output;
            } else {
               monitor->ext_type = NONE_EXT;
               ERROR((SGE_EVENT, MSG_UTI_MONITOR_MEMERROREXT));
            }
         break;
         
      case NONE_EXT :
            monitor->ext_type = NONE_EXT;
         break;
         
      default : 
            monitor->ext_type = NONE_EXT;
            ERROR((SGE_EVENT, MSG_UTI_MONITOR_UNSUPPORTEDEXT_D, ext));
   };

   if (monitor->ext_type == NONE_EXT) {
      monitor->ext_data_size = 0;
      monitor->ext_data = NULL;
      monitor->ext_output = NULL;
   }
   
   sge_monitor_reset(monitor);
   
   { 
      int i;
      struct timeval time;
      monitor->pos = -1; 

      gettimeofday(&time, NULL);
      
      for (i = 0; i < MAX_OUTPUT_LINES; i++) {
         sge_mutex_lock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
         if (Output[i].name == NULL) {
            monitor->pos = i;
            Output[i].output = monitor->output_line1;
            Output[i].name = thread_name;
            Output[i].warning_timeout = warning_timeout;
            Output[i].error_timeout = error_timeout;
            Output[i].update_time = time.tv_sec; 
            sge_mutex_unlock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
            break;
         }      
         sge_mutex_unlock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
      }
      
      sge_set_last_wait_time(monitor, time);
   }
  
   if (monitor->pos == -1) {
      ERROR((SGE_EVENT, MSG_UTI_MONITOR_NOLINES_S, monitor->thread_name));
   }
   
   DEXIT;
}


/****** uti/monitor/sge_monitor_status() ***************************************
*  NAME
*     sge_monitor_status() -- generates the status for qping / commlib
*
*  SYNOPSIS
*     u_long32 sge_monitor_status(char **info_message, u_long32 monitor_time) 
*
*  FUNCTION
*     This method creats the health monitoring output and returns the monitoring
*     info to the commlib. 
*
*  INPUTS
*     char **info_message   - info_message pointer, has to point to a NULL string
*     u_long32 monitor_time - the configured monitoring interval
*
*  RESULT
*     u_long32 - 0 : everything is okay
*                1 : warning
*                2 : error
*                3 : init problems
*
*  NOTES
*     MT-NOTE: sge_monitor_status() is MT safe 
*
*******************************************************************************/
u_long32 sge_monitor_status(char **info_message, u_long32 monitor_time)
{
   u_long32 ret = 0;
   char date[40];
   dstring ddate;
   
   DENTER(GDI_LAYER, "sge_monitor_status");

   if (info_message == NULL) {
      DEXIT;
      return 3;
   }

   sge_dstring_init(&ddate, date, sizeof(date));
   
   sge_mutex_lock("sge_monitor_status", SGE_FUNC, __LINE__, &global_mutex);

   sge_dstring_clear(&Info_Line);
   
   {/* this is the qping info section, it checks if each thread is still alive */
      int i;
      int error_count = 0;
      struct timeval now;
      double time;
      char   state = 'R';
      gettimeofday(&now,NULL);
      
      for (i = 0; i < MAX_OUTPUT_LINES; i++) {
         sge_mutex_lock("sge_monitor_status", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
         if (Output[i].name != NULL) {
            time = now.tv_usec - Output[i].last_wait_time.tv_usec;
            time = now.tv_sec - Output[i].last_wait_time.tv_sec + (time /1000000);

            
            if (Output[i].warning_timeout !=  NO_WARNING) {
               if (Output[i].warning_timeout < time) {
                  if (Output[i].error_timeout < time) {
                     state = 'E';
                  }
                  else {
                     state = 'W';
                  }
                  error_count++;
               }
            } 
            sge_dstring_sprintf_append(&Info_Line, MSG_UTI_MONITOR_INFO_SCF, Output[i].name, state, time);
         }
         sge_mutex_unlock("sge_monitor_status", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
      }

      if (error_count == 0) {
         sge_dstring_append(&Info_Line, MSG_UTI_MONITOR_OK);
      }
      else if (error_count == 1) {
         ret = 1;
         sge_dstring_append(&Info_Line, MSG_UTI_MONITOR_WARNING);
      }
      else {
         ret = 2;
         sge_dstring_append(&Info_Line, MSG_UTI_MONITOR_ERROR);
      }
      sge_dstring_append(&Info_Line, "\n");
   }

#if defined(LINUX) || defined(AIX43) || defined(AIX51) || defined(IRIX) || defined(SOLARIS) || defined(HP11)
   if (mallinfo_func_pointer != NULL) {
      struct mallinfo mallinfo_data = mallinfo_func_pointer();

      sge_dstring_sprintf_append(&Info_Line, MSG_UTI_MONITOR_SCHEXT_UUUUUUUUUU,
                                 mallinfo_data.arena,
                                 mallinfo_data.ordblks,
                                 mallinfo_data.smblks,
                                 mallinfo_data.hblks,
                                 mallinfo_data.hblkhd,
                                 mallinfo_data.usmblks,
                                 mallinfo_data.fsmblks,
                                 mallinfo_data.uordblks,
                                 mallinfo_data.fordblks,
                                 mallinfo_data.keepcost);
      sge_dstring_append(&Info_Line, "\n");
   }
#endif
 

   if (monitor_time != 0) { /* generates the output monitoring output data */
      int i;
      sge_dstring_append(&Info_Line, MSG_UTI_MONITOR_COLON); 
      sge_dstring_append(&Info_Line, "\n");

      for (i = 0; i < MAX_OUTPUT_LINES; i++) {
         sge_mutex_lock("sge_monitor_status", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
         if (Output[i].name != NULL) {
            append_time(Output[i].update_time, &Info_Line, false);
            sge_dstring_append(&Info_Line, " | ");
            sge_dstring_append_dstring(&Info_Line, Output[i].output);
            sge_dstring_append(&Info_Line,"\n");
         }
         sge_mutex_unlock("sge_monitor_status", SGE_FUNC, __LINE__, &(Output[i].Output_Mutex));
      }
   }
   else {
      sge_dstring_append(&Info_Line, MSG_UTI_MONITOR_DISABLED);
      sge_dstring_append(&Info_Line, "\n");
   }

   *info_message = strdup(sge_dstring_get_string(&Info_Line));
  
   sge_mutex_unlock("sge_monitor_status", SGE_FUNC, __LINE__, &global_mutex);
   DEXIT;
   return ret;
}


/****** uti/monitor/sge_set_last_wait_time() ***********************************
*  NAME
*     sge_set_last_wait_time() -- updates the last wait time (health monitoring)
*
*  SYNOPSIS
*     void sge_set_last_wait_time(monitoring_t *monitor, struct timeval after) 
*
*  FUNCTION
*     Updates the last wait time, which is used for the health monitoring to 
*     determine if a thread has a problem or not.
*
*  INPUTS
*     monitoring_t *monitor    - monitoring structure
*     struct timeval wait_time - current time 
*
*  NOTES
*     MT-NOTE: sge_set_last_wait_time() is MT safe 
*
*******************************************************************************/
void sge_set_last_wait_time(monitoring_t *monitor, struct timeval wait_time) 
{
   DENTER(GDI_LAYER, "sge_set_last_wait_time");

   if (monitor->pos != -1) {
      sge_mutex_lock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[monitor->pos].Output_Mutex));

      Output[monitor->pos].last_wait_time = wait_time;

      sge_mutex_unlock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[monitor->pos].Output_Mutex));
   }
   DEXIT;
}


/****** uti/monitor/sge_monitor_output() ***************************************
*  NAME
*     sge_monitor_output() -- outputs the result into the message file
*
*  SYNOPSIS
*     void sge_monitor_output(monitoring_t *monitor) 
*
*  FUNCTION
*     This function computes the output line from the gathered statistics.
*     The output is only generated, when the the output flag in the
*     monitoring structure is set.
*
*     The monitoring line is printed to the message file in the profiling
*     class and it made available for the qping -f output. For the qping
*     output, it stores the the generation time, though that qping can
*     show, when the message was generated.
*
*     If an extension is set, it calls the apropriate output function for
*     it.
*
*  INPUTS
*     monitoring_t *monitor - the monitoring info
*
*  NOTES
*     MT-NOTE: sge_monitor_output() is MT safe 
*
*******************************************************************************/
void sge_monitor_output(monitoring_t *monitor) 
{
   DENTER(GDI_LAYER, "sge_monitor_output");

   if ((monitor != NULL) && (monitor->output == true)) {
      struct timeval after;
      double time;

      gettimeofday(&after, NULL); 
      time = after.tv_usec - monitor->now.tv_usec;
      time = after.tv_sec - monitor->now.tv_sec + (time/1000000);

      sge_dstring_clear(monitor->work_line);
  
      sge_dstring_sprintf_append(monitor->work_line, MSG_UTI_MONITOR_DEFLINE_SF, 
                                 monitor->thread_name, monitor->message_in_count/time); 
      
      if (monitor->ext_type != NONE_EXT) {
         sge_dstring_append(monitor->work_line, " (");
         monitor->ext_output(monitor->work_line, monitor->ext_data, time);
         sge_dstring_append(monitor->work_line, ")");
      };
      
      sge_dstring_sprintf_append(monitor->work_line, MSG_UTI_MONITOR_DEFLINE_FFFFF,  
                                 monitor->message_out_count/time,
                                 monitor->message_in_count ? (time - monitor->idle)/monitor->message_in_count: 0,
                                 monitor->idle/time*100, monitor->wait/time*100, time);           
    
      /* only log into the message file, if the user wants it */
      if (monitor->log_monitor_mes) {
         sge_log(LOG_PROF, sge_dstring_get_string(monitor->work_line),__FILE__,SGE_FUNC,__LINE__); 
      }
     
      if (monitor->pos != -1) {
         dstring *tmp = NULL;

         sge_mutex_lock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[monitor->pos].Output_Mutex));
         tmp = Output[monitor->pos].output;
         Output[monitor->pos].output = monitor->work_line;
         Output[monitor->pos].update_time = after.tv_sec;         
         sge_mutex_unlock("sge_monitor_init", SGE_FUNC, __LINE__, &(Output[monitor->pos].Output_Mutex));

         monitor->work_line = tmp;
       }

      sge_monitor_reset(monitor);
   }
   
   DRETURN_VOID;
}


/****** uti/monitor/sge_monitor_reset() ****************************************
*  NAME
*     sge_monitor_reset() --  resets the monitoring data
*
*  SYNOPSIS
*     void sge_monitor_reset(monitoring_t *monitor) 
*
*  FUNCTION
*     Resets the data structure including the extesion. No data in the
*     extension is presevered.
*
*  INPUTS
*     monitoring_t *monitor - monitoring structure
*
*  NOTES
*     MT-NOTE: sge_monitor_reset() is MT safe 
*
*******************************************************************************/
void sge_monitor_reset(monitoring_t *monitor) 
{
   DENTER(GDI_LAYER, "sge_monitor_reset");

   monitor->monitor_time = 0;
   monitor->now.tv_sec = 0;
   monitor->now.tv_usec = 0;
   monitor->output = false;
   monitor->message_in_count = 0;
   monitor->message_out_count = 0;
   monitor->idle = 0.0;
   monitor->wait = 0.0;

   if (monitor->ext_type != NONE_EXT) {
      memset(monitor->ext_data, 0, monitor->ext_data_size); 
   }
  
   DEXIT;         
}

/****************************************
 * implementation section for extensions
 ****************************************/

/****** uti/monitor/ext_sch_output() *******************************************
*  NAME
*     ext_sch_output() -- generates a string from the scheduler extension
*
*  SYNOPSIS
*     static void 
*     ext_sch_output(char *message, int size, void 
*                    *monitoring_extension, double time) 
*
*  FUNCTION
*     generates a string from the extension and returns it.
*
*  INPUTS
*     char *message              - initilized string buffer
*     int size                   - buffer size
*     void *monitoring_extension - the extension structure
*     double time                - length of the mesurement interval
*
*  NOTES
*     MT-NOTE: ext_gdi_output() is MT safe 
*******************************************************************************/
static void ext_sch_output(dstring *message, void *monitoring_extension, double time)
{
   sge_dstring_sprintf_append(message, "");
}

/****** uti/monitor/ext_gdi_output() *******************************************
*  NAME
*     ext_gdi_output() -- generates a string from the GDI extension
*
*  SYNOPSIS
*     static void ext_gdi_output(char *message, int size, void 
*     *monitoring_extension, double time) 
*
*  FUNCTION
*     generates a string from the extension and returns it.
*
*  INPUTS
*     char *message              - initilized string buffer
*     int size                   - buffer size
*     void *monitoring_extension - the extension structure
*     double time                - length of the mesurement interval
*
*  NOTES
*     MT-NOTE: ext_gdi_output() is MT safe 
*******************************************************************************/
static void ext_gdi_output(dstring *message, void *monitoring_extension, double time)
{
   m_gdi_t *gdi_ext = (m_gdi_t*) monitoring_extension;

   sge_dstring_sprintf_append(message, MSG_UTI_MONITOR_GDIEXT_FFFFFFFFFFFFI,
            gdi_ext->eload_count/time, gdi_ext->ejob_count/time, 
            gdi_ext->econf_count/time, gdi_ext->eproc_count/time,
            gdi_ext->eack_count/time, 
            gdi_ext->gdi_add_count/time, gdi_ext->gdi_get_count/time,
            gdi_ext->gdi_mod_count/time, gdi_ext->gdi_del_count/time,
            gdi_ext->gdi_cp_count/time, gdi_ext->gdi_trig_count/time, 
            gdi_ext->gdi_perm_count/time,
            sge_u32c(gdi_ext->queue_length));
}

/****** uti/monitor/ext_lis_output() *******************************************
*  NAME
*     ext_lis_output() -- generates a string from the listener extension 
*
*  SYNOPSIS
*     static void 
*     ext_lis_output(char *message, int size, void 
*                    *monitoring_extension, double time) 
*
*  FUNCTION
*     generates a string from the extension and returns it.
*
*  INPUTS
*     char *message              - initilized string buffer
*     int size                   - buffer size
*     void *monitoring_extension - the extension structure
*     double time                - length of the mesurement interval
*
*  NOTES
*     MT-NOTE: ext_lis_output() is MT safe 
*******************************************************************************/
static void ext_lis_output(dstring *message, void *monitoring_extension, double time)
{
   m_lis_t *gdi_ext = (m_lis_t*) monitoring_extension;

   sge_dstring_sprintf_append(message, MSG_UTI_MONITOR_LISEXT_FFFF,
            gdi_ext->inc_gdi/time,
            gdi_ext->inc_ack/time,
            gdi_ext->inc_ece/time,
            gdi_ext->inc_rep/time);
}


/****** uti/monitor/ext_edt_output() *******************************************
*  NAME
*     ext_edt_output() -- generates a string from the GDI extension
*
*  SYNOPSIS
*     static void ext_edt_output(char *message, int size, void 
*     *monitoring_extension, double time) 
*
*  FUNCTION
*     generates a string from the extension and returns it.
*
*  INPUTS
*     char *message              - initilized string buffer
*     int size                   - buffer size
*     void *monitoring_extension - the extension structure
*     double time                - length of the mesurement interval
*
*  NOTES
*     MT-NOTE: ext_edt_output() is MT safe 
*
*******************************************************************************/
static void ext_edt_output(dstring *message, void *monitoring_extension, double time)
{
   m_edt_t *edt_ext = (m_edt_t*) monitoring_extension;
   
   sge_dstring_sprintf_append(message, MSG_UTI_MONITOR_EDTEXT_FFFFFFFF,
            ((double)edt_ext->client_count) / edt_ext->count,
            edt_ext->mod_client_count / time,
            edt_ext->ack_count / time,
            ((double)edt_ext->blocked_client_count) / edt_ext->count,
            ((double)edt_ext->busy_client_count) / edt_ext->count,
            
            edt_ext->new_event_count / time,
            edt_ext->added_event_count / time,
            edt_ext->skip_event_count / time);
}

/****** uti/monitor/ext_tet_output() *******************************************
*  NAME
*     ext_tet_output() -- generates a string from the GDI extension
*
*  SYNOPSIS
*     static void ext_edt_output(char *message, int size, void 
*     *monitoring_extension, double time) 
*
*  FUNCTION
*     generates a string from the extension and returns it.
*
*  INPUTS
*     dstring *message           - initilized string buffer
*     void *monitoring_extension - the extension structure
*     double time                - length of the mesurement interval
*
*  NOTES
*     MT-NOTE: ext_tet_output() is MT safe 
*
*******************************************************************************/

static void ext_tet_output(dstring *message, void *monitoring_extension, double time)
{
   m_tet_t *tet_ext = (m_tet_t*) monitoring_extension;
  
   sge_dstring_sprintf_append(message, MSG_UTI_MONITOR_TETEXT_FF,
            ((double)tet_ext->event_count) / tet_ext->count,
             tet_ext->exec_count / time
           );
}