#!/bin/sh # #+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-#+-#+-#-+-# # # $SGE_ROOT/util/rpc_startup_template # # DO NOT EDIT THIS FILE - this file is used as an template # Don't change the markers #+-#+-#+-# and "#-#-#-#" , they will be removed # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- # # SGE/SGEEE Berkeley DB RPC-Server startup script # #___INFO__MARK_BEGIN__ ########################################################################## # # The Contents of this file are made available subject to the terms of # the Sun Industry Standards Source License Version 1.2 # # Sun Microsystems Inc., March, 2001 # # # Sun Industry Standards Source License Version 1.2 # ================================================= # The contents of this file are subject to the Sun Industry Standards # Source License Version 1.2 (the "License"); You may not use this file # except in compliance with the License. You may obtain a copy of the # License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html # # Software provided under this License is provided on an "AS IS" basis, # WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, # WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, # MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. # See the License for the specific provisions governing your rights and # obligations concerning the Software. # # The Initial Developer of the Original Code is: Sun Microsystems, Inc. # # Copyright: 2001 by Sun Microsystems, Inc. # # All Rights Reserved. # ########################################################################## #___INFO__MARK_END__ # # This script can be called with the following arguments: # # start starts the RPC server # stop Terminates the RPC server # # Unix commands which may be used in this script: # cat cut tr ls grep awk sed basename # # This script requires the script $SGE_ROOT/util/arch # #set -x PATH=/bin:/usr/bin:/sbin:/usr/sbin #--------------------------------------------------------------------------- # The following lines provide the necessary info for adding a startup script # according to the Linux Standard Base Specification (LSB) which can # be found at: # # http://www.linuxfoundation.org/spec/booksets/LSB-Core-generic/LSB-Core-generic/initscrcomconv.html # ### BEGIN INIT INFO # Provides: sgebdb # Required-Start: $network $remote_fs $portmap # Required-Stop: # Default-Start: 3 5 # Default-Stop: 0 1 2 6 # Description: start Grid Engine Berkeley DB RPC Server ### END INIT INFO #--------------------------------------------------------------------------- SGE_ROOT=GENROOT; export SGE_ROOT SGE_CELL=GENCELL; export SGE_CELL # Attention: This information will be dynamically changed during, # Berkeley DB installation. Do not edit!!!! #---------------------------------------------------------------- BDBHOMES="-h SPOOLING_DIR" #---------------------------------------------------------------- unset CODINE_ROOT GRD_ROOT COD_CELL GRD_CELL # library path setting required only for architectures where RUNPATH is not supported arch=`$SGE_ROOT/util/arch` case $arch in #ENFORCE_SHLIBPATH#sol*|lx*) #ENFORCE_SHLIBPATH# ;; *) shlib_path_name=`$SGE_ROOT/util/arch -lib` old_value=`eval echo '$'$shlib_path_name` if [ x$old_value = x ]; then eval $shlib_path_name=$SGE_ROOT/lib/$arch else eval $shlib_path_name=$old_value:$SGE_ROOT/lib/$arch fi export $shlib_path_name ;; esac #--------------------------------------------------------------------------- # Shutdown # Send SIGTERM to process name $1 with pid in file $2 # Shutdown() { DetectSMFService bdb if [ -n "$service" ]; then /usr/sbin/svcadm disable -st $service exit $? fi case "$arch" in darwin*) PS_CMD="ps -auwwx" ;; *) PS_CMD="ps -efa" ;; esac if [ -f SPOOLING_DIR/bdb_messages ]; then db_pid=`cat SPOOLING_DIR/bdb_messages | cut -d" " -f2` fi if [ "$db_pid" != "" ]; then $PS_CMD | grep "$db_pid" | grep "berkeley_db_svc" >/dev/null 2>&1 if [ "$?" = 0 ]; then kill -TERM $db_pid ret=$? fi if [ "$ret" != 0 ]; then db_pid=`$PS_CMD | grep "berkeley_db_svc" | grep -v "grep" | awk '{ print $2 }'` if [ "$db_pid" != "" ]; then kill -TERM $db_pid ret=$? else echo "no running Berkeley DB server found!" exit 1 fi fi if [ "$ret" != 0 ]; then echo "can't stop Berkeley DB Server!" exit 1 fi fi } #--------------------------------------------------------------------------- # GetPathToBinaries # echo the name of the bin_dir on this system # The check is fullfilled if we can access the qstat binary # echo "none" if we can't determine the binary path GetPathToBinaries() { cfgname=$SGE_ROOT/$SGE_CELL/common/bootstrap base=none if [ -f $cfgname ]; then base=`grep binary_path $cfgname | awk '{ print $2 }'` if [ -f $base/qstat ]; then : elif [ -f $SGE_ROOT/util/arch ]; then arch=`$SGE_ROOT/util/arch` if [ -f $base/$arch/qstat ]; then base=$base/$arch fi fi fi echo $base } #--------------------------------------------------------------------------- # GetAdminUser # echo the name of the admin user on this system # echo "root" if admin user retrieval fails GetAdminUser() { echo GENADMINUSER } #--------------------------------------------------------------------------- # GetPathToUtilbin # echo the path to the binaires in utilbin # The check is fullfilled if we can access the "gethostname" binary # echo "none" if we can't determine the binary path # GetPathToUtilbin() { base=none if [ -f $SGE_ROOT/util/arch ]; then utilbindir=$SGE_ROOT/utilbin arch=`$SGE_ROOT/util/arch` if [ -f $utilbindir/$arch/gethostname ]; then base=$utilbindir/$arch fi fi echo $base } #------------------------------------------------------------------------- # Execute command as user $ADMINUSER and exit if exit status != 0 # if ADMINUSER = default then execute command unchanged # # uses binary "adminrun" form SGE distribution # # USES: variables "$verbose" (if set to "true" print arguments) # $ADMINUSER (if set to "default" do not use "adminrun) # "$SGE_UTILBIN" (path to the binary in utilbin) # ExecuteAsAdmin() { #TODO: Should not use hardcoded value, but read a bootstrap file! ADMINUSER=`GetAdminUser` if [ "$verbose" = true ]; then echo $* fi if [ $ADMINUSER = default ]; then $* else $utilbin_dir/adminrun $ADMINUSER "$@" & fi return 0 } #------------------------------------------------------------------------- # Makedir: make directory, chown/chgrp/chmod it. Exit if failure # Makedir() { file=$1 if [ ! -d $file ]; then echo "creating directory: $file" mkdir -p $1 fi chmod 755 $file } CheckSpoolDir() { if [ -d SPOOLING_DIR ]; then : else Makedir SPOOLING_DIR fi } CheckIfLocal() { FS=`dirname $1` case $SGE_ARCH in solaris*) df -l $FS >/dev/null 2>&1 if [ $? -eq 0 ]; then return 1 else return 0 fi ;; *linux) df -l $FS >/dev/null 2>&1 if [ $? -eq 0 ]; then return 1 else return 0 fi ;; *) echo "Don't know how to test for local filesystem. Exit." exit 1 ;; esac } #--------------------------------------------------------------------------- # DetectSMFService - sets service to a mask maching the name # $1 ... name # DetectSMFService() { name=$1 service="" if [ "$noSMF" = true ]; then return fi #Otherwise we try is it's available of the system if [ -f /lib/svc/share/smf_include.sh ]; then . /lib/svc/share/smf_include.sh smf_present if [ $? -ne 0 ]; then return fi else return fi #Check we have cluster_name file if [ ! -r "$SGE_ROOT/$SGE_CELL/common/cluster_name" ]; then echo "Error: could not find $SGE_ROOT/$SGE_CELL/common/cluster_name!" exit $SMF_EXIT_ERR_CONFIG fi #Cluster name must be unique SGE_CLUSTER_NAME=`cat $SGE_ROOT/$SGE_CELL/common/cluster_name 2>/dev/null` service="svc:/application/sge/$name:$SGE_CLUSTER_NAME" #Check if service exists /usr/bin/svcs $service > /dev/null 2>&1 if [ $? -ne 0 ]; then #No such service found in the system service="" fi } #--------------------------------------------------------------------------- usage() { echo "Grid Engine RPC server start/stop script. Valid parameters are:" echo "" echo " \"start\" startup Grid Engine RPC Server" echo " \"stop\" shutdown Grid Engine RPC Server" echo " \"-nosmf\" force no SMF" echo exit 1 } #--------------------------------------------------------------------------- # MAIN Procedure # if [ "$#" -gt 2 -o "$#" -lt 1 -o "$1" = "-h" -o "$1" = "help" ]; then usage fi noSMF=false for i in $*; do if [ "$i" = start ]; then startup=true elif [ "$i" = stop ]; then startup=false elif [ "$i" = -nosmf ]; then noSMF=true else usage fi done utilbin_dir=`GetPathToUtilbin` if [ "$utilbin_dir" = "none" ]; then echo "can't determine path to Grid Engine utility binaries" exit 1 fi if [ "$startup" = true ]; then DetectSMFService bdb if [ \( -z "$SMF_FMRI" -o "$SMF_FMRI" != "$service" \) -a -n "$service" ]; then /usr/sbin/svcadm enable -st $service exit $? fi #CheckSpoolDir #CheckIfLocal SPOOLING_DIR ExecuteAsAdmin $utilbin_dir/berkeley_db_svc -L SPOOLING_DIR/bdb_messages $BDBHOMES else echo Stopping Berkeley DB Shutdown fi