#!/usr/bin/env expect
############################################################################
# Purpose: Test of Slurm functionality
#          sacctmgr modify a user
############################################################################
# Copyright (C) 2008-2010 Lawrence Livermore National Security.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Joseph Donaghy <donaghy1@llnl.gov>
# CODE-OCEC-09-009. All rights reserved.
#
# This file is part of Slurm, a resource management program.
# For details, see <https://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# Slurm is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with Slurm; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals_accounting

set exit_code   0
set tc1		"test$test_id-cluster-1"
set tc2		"test$test_id-cluster-2"
set tc3		"test$test_id-cluster-3"
set ta1		"test$test_id-account.1"
set ta2		"test$test_id-account.2"
set ta3		"test$test_id-account.3"
set tu1         "test$test_id-user.1"
set tu2         "test$test_id-user.2"
set tu3         "test$test_id-user.3"
set access_err  0

# Cluster
array set clus_req {}

# Accounts
array set acct_req {}
set acct_req(cluster) $tc1,$tc2,$tc3

# User
array set user_req {}
set user_req(cluster) $tc1,$tc2,$tc3
set user_req(account) $ta1,$ta2,$ta3

# Mod User
array set user_mod_info {}
set user_mod_info(cluster) $tc1,$tc2,$tc3
array set user_mod_acct {
	adminlevel  Operator
}
set user_mod_acct(defaultaccount) "'$ta2'"
array set user_mod_assoc {}

array set user_mod_info2 {}
set user_mod_info2(cluster) $tc1,$tc2,$tc3
array set user_mod_acct2 {
	adminlevel None
}
array set user_mod_assoc2 {
	fairshare  1700
	maxcpumin  700000
	maxjob     70
	maxnode    700
	maxwall    00:07:00
}


set timeout 60

#
# Check accounting config and bail if not found.
#
if { [test_account_storage] == 0 } {
	skip "This test can't be run without a usable AccountStorageType"
}

if { [string compare [check_accounting_admin_level] "Administrator"] } {
	skip "This test can't be run without being an Accounting administrator.\nUse: sacctmgr mod user \$USER set admin=admin"
}

#make sure we have a clean system and permission to do this work
remove_user "" "" "$tu1,$tu2,$tu3"
remove_acct "" "$ta1,$ta2,$ta3"
remove_cluster "$tc1,$tc2,$tc3"
if {$access_err != 0} {
	skip "Not authorized to perform this test"
}

#add cluster
incr exit_code [add_cluster "$tc1,$tc2,$tc3" [array get clus_req]]
if { $exit_code } {
     	remove_user "" "" "$tu1,$tu2,$tu3"
	remove_acct "" "$ta1,$ta2,$ta3"
	remove_cluster "$tc1,$tc2,$tc3"
	fail "Unable to add cluster ($tc1,$tc2,$tc3)"
}

#add accounts
incr exit_code [add_acct "$ta1,$ta2,$ta3" [array get acct_req]]
if { $exit_code } {
	remove_user "" "" "$tu1,$tu2,$tu3"
	remove_acct "" "$ta1,$ta2,$ta3"
	remove_cluster "$tc1,$tc2,$tc3"
	fail "Unable to add account ($ta1,$ta2,$ta3)"
}

#add users
incr exit_code [add_user "$tu1,$tu2,$tu3" [array get user_req]]
if { $exit_code } {
	remove_user "" "" "$tu1,$tu2,$tu3"
	remove_acct "" "$ta1,$ta2,$ta3"
	remove_cluster "$tc1,$tc2,$tc3"
	fail "Unable to add user ($tu1,$tu2,$tu3)"
}

# First test change the AdminLevel and DefaultAccount of a user
# cluster account name part wadmin wdacct wdwckey qos fairshare grpcpumin grpcpu grpjob grpnode grpsubmit grpwall maxcpumin maxcpu maxjob maxnode maxsubmit maxwall admin dacct dwckey

incr exit_code [mod_user $tu1 [array get user_mod_info] [array get user_mod_acct] [array get user_mod_assoc]]
if { $exit_code } {
	remove_user "" "" "$tu1,$tu2,$tu3"
	remove_acct "" "$ta1,$ta2,$ta3"
	remove_cluster "$tc1,$tc2,$tc3"
	fail "Unable to modify user ($tu1)"
}

#
# Use sacctmgr to list the test user modification
#
set matches 0
set my_pid [spawn $sacctmgr -n -p list user names=$tu1,$tu2,$tu3 format="User,DefaultA,Admin" cluster=$tc1]
expect {
	-re "There was a problem" {
	        log_error "There was a problem with the sacctmgr command"
	    	incr exit_code 1
	}
	-re "($tu1.$ta2.$user_mod_acct(adminlevel).|($tu2|$tu3).$ta1.$user_mod_acct2(adminlevel).)" {
		incr matches
		exp_continue
	}
	timeout {
		log_error "sacctmgr list associations not responding"
		slow_kill $my_pid
		incr exit_code 1
	}
	eof {
		wait
	}
}

if {$matches != 3} {
	fail "User modification 3 incorrect with only $matches"
}

# Next, test change the limits of one user
# cluster account name part wadmin wdacct wdwckey qos fairshare grpcpumin grpcpu grpjob grpnode grpsubmit grpwall maxcpumin maxcpu maxjob maxnode maxsubmit maxwall admin dacct dwckey

incr exit_code [mod_user $tu2 [array get user_mod_info2] [array get user_mod_acct2] [array get user_mod_assoc2]]
if { $exit_code } {
	remove_user "" "" "$tu1,$tu2,$tu3"
	remove_acct "" "$ta1,$ta2,$ta3"
	remove_cluster "$tc1,$tc2,$tc3"
	fail "Unable to modify user ($tu2)"
}

#
# Use sacctmgr to list the test user modifications
#
set matches 0
set my_pid [spawn $sacctmgr -n -p list assoc users=$tu1,$tu2,$tu3 format="User,Cluster,Fairshare,Maxcpum,MaxJ,MaxN,MaxW"]
expect {
	-re "There was a problem" {
		log_error "There was a problem with the sacctmgr command"
	    incr exit_code 1
	}
	-re "($tu2.($tc1|$tc2|$tc3).$user_mod_assoc2(fairshare).$user_mod_assoc2(maxcpumin).$user_mod_assoc2(maxjob).$user_mod_assoc2(maxnode).$user_mod_assoc2(maxwall).|($tu1|$tu3).($tc1|$tc2|$tc3).1.....)" {
		incr matches
		exp_continue
	}
	timeout {
		log_error "sacctmgr list associations not responding"
		slow_kill $my_pid
		incr exit_code 1
	}
	eof {
		wait
	}
}

if {$matches != 27} {
	log_error "User modification 27 incorrect with only $matches"
	incr exit_code 1
}

# This is the end below here

incr exit_code [remove_user "" "" "$tu1,$tu2,$tu3"]
incr exit_code [remove_acct "" "$ta1,$ta2,$ta3"]
incr exit_code [remove_cluster "$tc1,$tc2,$tc3"]

if {$exit_code != 0} {
	fail "Test failed due to previous errors"
}