#!/usr/bin/env expect
############################################################################
# Purpose: Test of Slurm functionality
#          Confirm that a job executes with the specified nodes
#          (--nodelist and --exclude options).
############################################################################
# Copyright (C) 2002-2007 The Regents of the University of California.
# Copyright (C) 2008 Lawrence Livermore National Security.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Morris Jette <jette1@llnl.gov>
# CODE-OCEC-09-009. All rights reserved.
#
# This file is part of Slurm, a resource management program.
# For details, see <https://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# Slurm is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with Slurm; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals

set exit_code   0

#
# Submit a 3+ node job
#
set host_0      ""
set host_1      ""
set host_2      ""
set host_3      ""
set node_cnt 3
set timeout $max_job_delay

set available [available_nodes idle]
if {$available < $node_cnt} {
    skip "Not enough nodes currently available ($available avail, $node_cnt needed)"
}

set srun_pid [spawn $srun -N$node_cnt -l -t1 $bin_printenv SLURMD_NODENAME]
expect {
	-re "Node count specification invalid" {
		skip "Can't test srun task distribution"
	}
	-re "configuration not available" {
		slow_kill $srun_pid
		skip "Partition too small for test"
	}
	-re "($number): *($re_word_str)" {
		if {$expect_out(1,string) == 0} {
			set host_0 $expect_out(2,string)
		}
		if {$expect_out(1,string) == 1} {
			set host_1 $expect_out(2,string)
		}
		if {$expect_out(1,string) == 2} {
			set host_2 $expect_out(2,string)
		}
		if {$expect_out(1,string) == 3} {
			set host_3 $expect_out(2,string)
		}
		exp_continue
	}
	timeout {
		slow_kill $srun_pid
		fail "srun not responding"
	}
	eof {
		wait
	}
}

#
# Verify node count
#
if {[string compare $host_0 ""] == 0} {
	log_error "Did not get hostname of task 0"
	set exit_code   1
}
if {[string compare $host_1 ""] == 0} {
	log_error "Did not get hostname of task 1"
	set exit_code   1
}
if {[string compare $host_2 ""] == 0} {
	log_error "Did not get hostname of task 2"
	set exit_code   1
}
if {[test_front_end] != 0} {
	log_warn "Additional testing is incompatible with front-end systems"
	pass
}
if {[string compare $host_3 ""] != 0} {
	log_error "Started more than three tasks"
	set exit_code   1
}

set dup_hostname 0
if {[string compare $host_0 $host_1] == 0} {
	incr dup_hostname
}
if {[string compare $host_0 $host_2] == 0} {
	incr dup_hostname 1
}
if {$dup_hostname == 1} {
	log_error "Re-used a node in the allocation"
	set exit_code   1
}
set exclude_node $host_0
set include_node $host_2

#
# Submit a job explicitly excluding a node
#
set host_0      ""
set host_1      ""
set host_2      ""
set timeout $max_job_delay
set srun_pid [spawn $srun -N2 -l --exclude=$exclude_node -t1 $bin_printenv SLURMD_NODENAME]
expect {
	-re "Invalid node name specified" {
		skip "Appears you are using multiple slurmd testing. This test won't work in that fashion"
	}

	-re "($number): *($re_word_str)" {
		if {$expect_out(1,string) == 0} {
			set host_0 $expect_out(2,string)
		}
		if {$expect_out(1,string) == 1} {
			set host_1 $expect_out(2,string)
		}
		if {$expect_out(1,string) == 2} {
			set host_2 $expect_out(2,string)
		}
		exp_continue
	}
	timeout {
		slow_kill $srun_pid
		fail "srun not responding"
	}
	eof {
		wait
	}
}

#
# Verify node count and names
#
if {[string compare $host_0 ""] == 0} {
	log_error "Did not get hostname of task 0"
	set exit_code   1
}
if {[string compare $host_1 ""] == 0} {
	log_error "Did not get hostname of task 1"
	set exit_code   1
}
if {[string compare $host_2 ""] != 0} {
	log_error "Started more than two tasks"
	set exit_code   1
}
set dup_hostname 0
if {[string compare $host_0 $exclude_node] == 0} {
	set dup_hostname 1
}
if {[string compare $host_1 $exclude_node] == 0} {
	set dup_hostname 1
}
if {$dup_hostname == 1} {
	log_error "Allocated an excluded node"
	set exit_code   1
}

#
# Submit a job explicitly including a node
#
set host_0      ""
set host_1      ""
set timeout $max_job_delay
set srun_pid [spawn $srun -N1 -l --nodelist=$include_node -t1 $bin_printenv SLURMD_NODENAME]
expect {
	-re "($number): *($re_word_str)" {
		if {$expect_out(1,string) == 0} {
			set host_0 $expect_out(2,string)
		}
		if {$expect_out(1,string) == 1} {
			set host_1 $expect_out(2,string)
		}
		exp_continue
	}
	timeout {
		log_error "srun not responding"
		slow_kill $srun_pid
		set exit_code 1
	}
	eof {
		wait
	}
}

#
# Verify node count and names
#
if {[string compare $host_0 ""] == 0} {
	log_error "Did not get hostname of task 0"
	set exit_code   1
}
if {[string compare $host_1 ""] != 0} {
	log_error "Started more than one task"
	set exit_code   1
}
set dup_hostname 0
if {[string compare $host_0 $include_node] == 0} {
	set dup_hostname 1
}
if {$dup_hostname == 0} {
	log_error "Allocation lacked an included node"
	set exit_code   1
}

if {$exit_code != 0} {
	fail "Test failed due to previous errors (\$exit_code = $exit_code)"
}